An Environment-Friendly Surface Pretreatment of ABS Plastic for Electroless Plating Using Chemical Foaming Agents
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 강동호 | - |
dc.contributor.author | 최진철 | - |
dc.contributor.author | 최진문 | - |
dc.contributor.author | 김태완 | - |
dc.date.accessioned | 2021-12-17T02:45:16Z | - |
dc.date.available | 2021-12-17T02:45:16Z | - |
dc.date.created | 2021-12-16 | - |
dc.date.issued | 2010 | - |
dc.identifier.issn | 1229-7607 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/21250 | - |
dc.description.abstract | We have developed an environment-friendly etching process, an alternative to the dichromic acid etching process, as a pretreatment of acrylonitrile-butadiene-styrene (ABS) plastic for electroless plating. In order to plate ABS plastic in an electroless way, there should be fine holes on the surface of the ABS plastic to enhance mechanically the adhesion strength between the plastic surface and the plate. To make these holes, the surface was coated uniformly with dispersed chemical foaming agents in a mixture of environmentally friendly dispersant and solvent by the methods of dipping or direct application. The solvent seeps into just below the surface and distributes the chemical foaming agents uniformly beneath the surface. After drying off the surface, the surface was heated at a temperature well below the glass transition temperature of ABS plastic. By pyrolysis, the chemical foaming agents made fine holes on the surface. In order to discover optimum conditions for the formation of fine holes, the mixing ratio of the solvent, the dispersant and the chemical foaming agent were controlled. After the etching process, the surface was plated with nickel. We tested the adhesion strength between the ABS plastic and nickel plate by the cross-cutting method. The surface morphologies of the ABS plastic before and after the etching process were observed by means of a scanning electron microscope. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | 한국전기전자재료학회 | - |
dc.title | An Environment-Friendly Surface Pretreatment of ABS Plastic for Electroless Plating Using Chemical Foaming Agents | - |
dc.title.alternative | An Environment-Friendly Surface Pretreatment of ABS Plastic for Electroless Plating Using Chemical Foaming Agents | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 김태완 | - |
dc.identifier.bibliographicCitation | Transactions on Electrical and Electronic Materials, v.11, no.4, pp.174 - 177 | - |
dc.relation.isPartOf | Transactions on Electrical and Electronic Materials | - |
dc.citation.title | Transactions on Electrical and Electronic Materials | - |
dc.citation.volume | 11 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 174 | - |
dc.citation.endPage | 177 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART001470704 | - |
dc.description.journalClass | 2 | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Electroless plating | - |
dc.subject.keywordAuthor | Acrylonitrile-butadiene-styrene plastic | - |
dc.subject.keywordAuthor | Chemical foaming agent | - |
dc.subject.keywordAuthor | Nickel | - |
dc.subject.keywordAuthor | Etching | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.