Detailed Information

Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads

Hydroxyapatite crystallization from a highly concentrated phosphate solution using powdered converter slag as a seed material

Authors
Kim, Eung-HoYim, Soo-BinJung, Ho-ChanLee, Eok-Jae
Issue Date
25-Aug-2006
Publisher
ELSEVIER SCIENCE BV
Keywords
completely mixed phosphorus crystallization process; converter slag; phosphorus recovery; seed particles; hydroxyapatite
Citation
JOURNAL OF HAZARDOUS MATERIALS, v.136, no.3, pp.690 - 697
Journal Title
JOURNAL OF HAZARDOUS MATERIALS
Volume
136
Number
3
Start Page
690
End Page
697
URI
https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/24518
DOI
10.1016/j.jhazmat.2005.12.051
ISSN
0304-3894
Abstract
A system for recovering phosphorus from membrane-filtrate from a sludge reduction process containing high phosphorus concentrations was developed. In this system, referred to as the completely mixed phosphorus crystallization reactor, powdered converter slag was used as a seed material. In a preliminary experiment, the optimal pH range for metastable crystallization of phosphorus from membrane-filtrate containing about 100 mg/L PO4-P was found to be 6.6-7.0. The laboratory scale completely mixed phosphorus crystallization reactor, actually operated in pH range of 6.8-7.6 for influent 72.9 mg/L PO4-P, achieved an average efficiency of phosphorus removal from the membrane-filtrate of 52.4% during a 30-day experiment. Mixed-liquor suspended solids (MLSS) measurements revealed that, out of 0.24 kg PO4-P in the original membrane-filtrate fed into the reactor, 0.12 kg PO4-P was recovered on the seed particles after 30 days. X-ray diffraction (XRD) pattern and Fourier transform infrared (FT-IR) spectra of the crystalline material deposited on the seed particles showed peaks consistent with hydroxyapatite. Scanning electron micrograph (SEM) images exhibited that finely distributed crystalline material was formed on the surfaces of seed particles. Energy dispersive X-ray spectroscopy (EDS) mapping analysis revealed that the molar composition ratio of Ca/P of the crystalline material was 1.84. The Ca/P molar ratio > 1.67 for crystalline substance might result from the presence of CaCO3 on the crystalline surfaces. A particle size distribution analysis showed that the average particle size increased from 22 mu m for the original converter slag seed particles, to 94 mu m after 30 days of phosphorus crystallization. Collectively, the present results suggest that the proposed phosphorus crystallization recovery system is an effective tool for recycling phosphorus from phosphate solution. (c) 2006 Elsevier B.V. All rights reserved.
Files in This Item
There are no files associated with this item.
Appears in
Collections
College of Engineering > Civil Engineering Major > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Altmetrics

Total Views & Downloads

BROWSE