Design and cooling characteristic results of cryogenic system for 6.6 kV/200 A inductive fault current limiter
- Authors
- Kang, HK; Ahn, MC; Kim, HJ; Chang, HM; Ko, TK
- Issue Date
- Jun-2004
- Publisher
- IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC
- Keywords
- cooling system; inductive SFCL; SFCL; sub-cooled nitrogen.
- Citation
- IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, v.14, no.2, pp.883 - 886
- Journal Title
- IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY
- Volume
- 14
- Number
- 2
- Start Page
- 883
- End Page
- 886
- URI
- https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/25771
- DOI
- 10.1109/TASC.2004.830309
- ISSN
- 1051-8223
- Abstract
- The conduction-cooled cryogenic cooling system for 1.2 kV/80 A inductive Superconducting Fault Current Limiter (SFCL) was fabricated and tested for its cooling characteristics in 2002. The observed thermal stability of the conduction-cooled system was very unreliable and precarious for the applied superconducting equipment with very large variation of currents like SFCL. Therefore, we replaced the conduction-cooled system with the sub-cooled nitrogen system for the 6.6 kV/200 A SFCL. In this paper, the design techniques and test results of cooling characteristics were introduced. The conditions for achieving the sub-cooled nitrogen state were 1 atm and 64 K. First, the temperature of 64 K was achieved by using the rotary pump and then the pressure of 1 atm was achieved by GHe. The characteristics of liquid nitrogen were strongly enhanced in these conditions. This fabricated cryogenic system merely for the short run operation test SFCL. Finally, the cryogenic system for the long run operation test SFCL was introduced.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Department of Mechanical and System Design Engineering > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/25771)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.