Smart Damper Using Sliding Friction of Aramid Brake Lining and Self-centering of Rubber Springs
- Authors
- Jeong, Kyuho; Choi, Eunsoo; Back, Sung-Yong; Kang, Joo-Won
- Issue Date
- Dec-2016
- Publisher
- KOREAN SOC STEEL CONSTRUCTION-KSSC
- Keywords
- smart damper; sliding friction; pre-compression; rubber spring; self-centering
- Citation
- INTERNATIONAL JOURNAL OF STEEL STRUCTURES, v.16, no.4, pp.1239 - 1250
- Journal Title
- INTERNATIONAL JOURNAL OF STEEL STRUCTURES
- Volume
- 16
- Number
- 4
- Start Page
- 1239
- End Page
- 1250
- URI
- https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/7083
- DOI
- 10.1007/s13296-016-0065-0
- ISSN
- 1598-2351
- Abstract
- The purpose of this study is to develop a smart damper with flag-shaped behavior by using the sliding friction of aramid brake lining and the restoring capacity of pre-compressed rubber springs. For this purpose, the friction force of aramid brake lining pressed by bolts was used along with polyurethane rubbers, each with a length of 80 mm, a diameter of 95 mm, and a circular hole of 37 mm. In the experiments, loading frequency and torque force were considered. The loading frequency varied from 0.1 to 2.0 Hz, and frictional force was controlled by variable bolt torque force. The tests were conducted to demonstrate that the clamping force by the bolts could provide normal force to frictional material. The friction force by the aramid brake lining sliding was tested, followed by the pre-compressed rubber springs' behavior. Afterward, a damper combining the two components was tested to verify flag-shaped behavior by using a dynamic actuator, and the damping ratios were evaluated from the hysteretic curves. The behavior of the damper closely matched flag-shaped behavior, resulting in self-centering and energy dissipation capacity.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > Civil and Environmental Engineering > Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.