Xe-arc flash annealing of indium tin oxide thin-films prepared on glass backplanes
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Yoonsuk | - |
dc.contributor.author | Park, Seungho | - |
dc.contributor.author | Kim, Byung-Kuk | - |
dc.contributor.author | Kim, Hyoung June | - |
dc.contributor.author | Hwang, Jin-Ha | - |
dc.date.available | 2020-07-10T06:42:54Z | - |
dc.date.created | 2020-07-06 | - |
dc.date.issued | 2015-12 | - |
dc.identifier.issn | 0017-9310 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/hongik/handle/2020.sw.hongik/8942 | - |
dc.description.abstract | Using a Xe-arc flashing of 0.4 ms, indium tin oxide (ITO) thin-films widely applied to fabricate transparent conducting electrodes for solar cells and displays are annealed at room temperature in order to improve their electric conductance and Optical transmittances. ITO thin-films of 100 nm in thickness are deposited on a glass substrate of 500 mu m in thickness by the magnetron sputtering method. Ray-tracing calculation estimates that heat absorbed in the thin-film during flash lamp annealing (FLA) process with using an additional back-reflector increases by about 2.8 times greater than that without using the back-reflector. Simulation based on one-dimensional conduction/radiation heat transfer model shows that the film temperatures during the FLA process exceed the crystallization point of the ITO material, indicating that its physical properties have been varied accordingly. Undergoing the short experimental FLA process, resistivity of the specimen has been decreased by about 30%, which is comparable to the ones obtained from conventional furnace annealing at temperatures ranging 200-300 degrees C for an hour, while the transmittances in the visible light range have been slightly increased. Morphological features of the films are investigated using XRD, XPS, AFM, and SEM, indicating that the specimens treated by the FLA or in furnace have crystallites larger than that of the as-received. (C) 2015 Elsevier Ltd. All rights reserved. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | PERGAMON-ELSEVIER SCIENCE LTD | - |
dc.subject | OPTICAL-PROPERTIES | - |
dc.subject | AMORPHOUS-SILICON | - |
dc.subject | ITO FILMS | - |
dc.subject | INDUCED CRYSTALLIZATION | - |
dc.subject | ELECTRICAL-PROPERTIES | - |
dc.subject | STRUCTURAL-PROPERTIES | - |
dc.subject | HEAT-TREATMENT | - |
dc.subject | TEMPERATURE | - |
dc.subject | DEPOSITION | - |
dc.subject | ANODE | - |
dc.title | Xe-arc flash annealing of indium tin oxide thin-films prepared on glass backplanes | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | Park, Seungho | - |
dc.contributor.affiliatedAuthor | Hwang, Jin-Ha | - |
dc.identifier.doi | 10.1016/j.ijheatmasstransfer.2015.07.132 | - |
dc.identifier.scopusid | 2-s2.0-84939495241 | - |
dc.identifier.wosid | 000362130700056 | - |
dc.identifier.bibliographicCitation | INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.91, pp.543 - 551 | - |
dc.relation.isPartOf | INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | - |
dc.citation.title | INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | - |
dc.citation.volume | 91 | - |
dc.citation.startPage | 543 | - |
dc.citation.endPage | 551 | - |
dc.type.rims | ART | - |
dc.type.docType | Article | - |
dc.description.journalClass | 1 | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Thermodynamics | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalResearchArea | Mechanics | - |
dc.relation.journalWebOfScienceCategory | Thermodynamics | - |
dc.relation.journalWebOfScienceCategory | Engineering, Mechanical | - |
dc.relation.journalWebOfScienceCategory | Mechanics | - |
dc.subject.keywordPlus | OPTICAL-PROPERTIES | - |
dc.subject.keywordPlus | AMORPHOUS-SILICON | - |
dc.subject.keywordPlus | ITO FILMS | - |
dc.subject.keywordPlus | INDUCED CRYSTALLIZATION | - |
dc.subject.keywordPlus | ELECTRICAL-PROPERTIES | - |
dc.subject.keywordPlus | STRUCTURAL-PROPERTIES | - |
dc.subject.keywordPlus | HEAT-TREATMENT | - |
dc.subject.keywordPlus | TEMPERATURE | - |
dc.subject.keywordPlus | DEPOSITION | - |
dc.subject.keywordPlus | ANODE | - |
dc.subject.keywordAuthor | Indium tin oxide (ITO) | - |
dc.subject.keywordAuthor | Flash lamp annealing | - |
dc.subject.keywordAuthor | Multiple reflection | - |
dc.subject.keywordAuthor | Electrical resistance | - |
dc.subject.keywordAuthor | Optical transmittance | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
94, Wausan-ro, Mapo-gu, Seoul, 04066, Korea02-320-1314
COPYRIGHT 2020 HONGIK UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.