일축가압법으로 벌크흑연 제조 시 성형압력에 따른 열린기공률 변화가 함침 후 밀도 향상에 미치는 영향
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이상민 | - |
dc.contributor.author | 이상혜 | - |
dc.contributor.author | 노재승 | - |
dc.date.accessioned | 2021-11-05T02:46:05Z | - |
dc.date.available | 2021-11-05T02:46:05Z | - |
dc.date.created | 2021-03-09 | - |
dc.date.issued | 2021-01 | - |
dc.identifier.issn | 1225-7591 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/20051 | - |
dc.description.abstract | The change in the open porosity of bulk graphite as a function of the uniaxial molding pressure during manufacturing is studied using artificial graphite powder. Subsequently, the graphite is impregnated to determine the effect of the open porosity on the impregnation efficiency and to improve the density of the final bulk graphite. Bulk graphite is manufactured with different uniaxial molding pressures after mixing graphite powder, which is the by-product of processing the final graphite products and phenolic resin. The bulk density and open porosity are measured using the Archimedes method. The bulk density and open porosity of bulk graphite increase as the molding pressure increases. The open porosity of molded bulk graphite is 25.35% at 30 MPa and 29.84% at 300 MPa. It is confirmed that the impregnation efficiency increases when the impregnation process is performed on a specimen with large open porosity. In this study, the bulk density of bulk graphite molded at 300 MPa is 11.06% higher than that before impregnation, which is the highest reported increase. Therefore, it is expected that the higher the uniaxial pressure, the higher the density of bulk graphite. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국분말야금학회 | - |
dc.title | 일축가압법으로 벌크흑연 제조 시 성형압력에 따른 열린기공률 변화가 함침 후 밀도 향상에 미치는 영향 | - |
dc.title.alternative | Effect of Change in Open Porosity as a Function of Uniaxial Molding Pressure on Density Improvement After Impregnation | - |
dc.type | Article | - |
dc.contributor.affiliatedAuthor | 이상민 | - |
dc.contributor.affiliatedAuthor | 이상혜 | - |
dc.contributor.affiliatedAuthor | 노재승 | - |
dc.identifier.bibliographicCitation | 한국분말야금학회지, v.28, no.1, pp.7 - 12 | - |
dc.relation.isPartOf | 한국분말야금학회지 | - |
dc.citation.title | 한국분말야금학회지 | - |
dc.citation.volume | 28 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 7 | - |
dc.citation.endPage | 12 | - |
dc.type.rims | ART | - |
dc.identifier.kciid | ART002691824 | - |
dc.description.journalClass | 2 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Bulk graphite | - |
dc.subject.keywordAuthor | Open porosity | - |
dc.subject.keywordAuthor | Compacting pressure | - |
dc.subject.keywordAuthor | Orientation | - |
dc.subject.keywordAuthor | Anisotropy ratio | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.