Modified Wilkinson Power Divider Using Transmission Lines for Various Terminated Impedances and an Arbitrary Power Ratio
- Authors
- Yoon, Young-Chul; Kim, Young
- Issue Date
- Jan-2019
- Publisher
- KOREAN INST ELECTROMAGNETIC ENGINEERING & SCIENCE
- Keywords
- Arbitrary Power Ratio; Unequal Divider; Uniform Transmission Line; Various Terminated Impedance; Wilkinson Divider
- Citation
- JOURNAL OF ELECTROMAGNETIC ENGINEERING AND SCIENCE, v.19, no.1, pp.42 - 47
- Journal Title
- JOURNAL OF ELECTROMAGNETIC ENGINEERING AND SCIENCE
- Volume
- 19
- Number
- 1
- Start Page
- 42
- End Page
- 47
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/206
- DOI
- 10.26866/jees.2019.19.1.42
- ISSN
- 2234-8409
- Abstract
- This paper introduces a modified Wilkinson power divider that uses uniform transmission lines for various terminated impedances and an arbitrary power ratio. For the designed power ratio, the proposed divider changes only the electrical lengths of the transmission lines between the input and output ports, and those between the output ports and the isolation resistor. In this case, even when various termination impedances of the ports exist, the divider characteristics are satisfied. To verify the feasibility of the proposed divider, two circuits were designed to operate at a frequency of 2 GHz with 2:1 and 4:1 power splitting ratios and various terminated impedances of 40, 70, and 60 Omega for one circuit, and 50, 70, and 60 Omega for the other. The measurement and simulation results were in good agreement.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - School of Electronic Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.