Cross-hole Type 밀링용 비 연삭 인서트의 가공성능평가Cutting Performance Evaluation of Non-Ground Cross-hole Type Milling Insert
- Other Titles
- Cutting Performance Evaluation of Non-Ground Cross-hole Type Milling Insert
- Authors
- 박휘근; 김택수; 이상민; 이원석; 최윤서; 이종찬
- Issue Date
- 2011
- Publisher
- 한국기계가공학회
- Keywords
- Non-Ground(비연삭); Milling(밀링); Insert(인서트); Cutting Force(절삭저항력); Surface Roughness (표면조도); Flank Wear(플랭크 마모)
- Citation
- 한국기계가공학회지, v.10, no.2, pp 73 - 78
- Pages
- 6
- Journal Title
- 한국기계가공학회지
- Volume
- 10
- Number
- 2
- Start Page
- 73
- End Page
- 78
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23093
- ISSN
- 1598-6721
2288-0771
- Abstract
- The existent cutting insert have occupied most product of grinding style, because it has a problem of accuracy and manufacturing process. The product has a concept but development is difficult, because grinding and manufacturing by press are impossible. But by development and stabilization of a technology, preference of non-ground insert increases gradually. And then insert that grinding is impossible is developed availably as non-ground product by using developed equipment and software.
In this paper reports some experimental results on the machining performance of non-ground Cutting inserts. Three kinds of Cutting inserts were manufactured without using grinding process. Machining experiments were carried out to compare the machining performance of non-ground inserts with that of ground ones. The experimental results indicate that the cutting forces and tool wear and surface roughnesses of machined surface of both ground and non-ground inserts are comparable.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Department of Mechanical Design Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.