Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
IT 부품용 마그네슘 합금의 고속 탭핑가공에 관한 연구A Study on the High Speed Tapping of Magnesium Alloy for IT Parts
- Other Titles
- A Study on the High Speed Tapping of Magnesium Alloy for IT Parts
- Issue Date
- 2012
- Publisher
- 한국기계가공학회
- Keywords
- Magnesium Alloy(마그네슘합금); High Speed Tapping(고속 탭핑); Cutting Force(절삭력); Thread(나사); Rigid Tapping(동기탭핑)
- Citation
- 한국기계가공학회지, v.11, no.3, pp 29 - 34
- Pages
- 6
- Journal Title
- 한국기계가공학회지
- Volume
- 11
- Number
- 3
- Start Page
- 29
- End Page
- 34
- ISSN
- 1598-6721
2288-0771
- Abstract
- This paper reports some experimental results in high speed rigid tapping of magnesium alloy(AZ91D). M3 spiral tap and high speed spindle tapping center of gantry type were used in experiments and thrust forces were measured. The experimental results indicate that the thrust forces are proportional to the spindle speed and depth of cut. The thrust forces increase as the depth of cut increases. M3 Tapping was achieved at the spindle speed of 10,000rpm, depth of cut of 1.5D and total stroke of 32mm.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Department of Mechanical Design Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.