치과 핸드피스용 고속 PMSM의 정현파 구동을 위한 인버터 직류 링크전압 제어기법DC link voltage control method in the sinusoidal current drive system for dental hand-piece PMSM
- Other Titles
- DC link voltage control method in the sinusoidal current drive system for dental hand-piece PMSM
- Authors
- 전금상; 박상욱; 박재성; 김상희; 안희욱
- Issue Date
- 2013
- Publisher
- 한국기계가공학회
- Keywords
- 넓은 속도 범위; PMSM 드라이브; 전류 리플; 직류 링크전압 제어; Wide Speed range; PMSM Drive; Current ripple; DC link voltage control
- Citation
- 한국기계가공학회지, v.12, no.4, pp 16 - 21
- Pages
- 6
- Journal Title
- 한국기계가공학회지
- Volume
- 12
- Number
- 4
- Start Page
- 16
- End Page
- 21
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23285
- ISSN
- 1598-6721
2288-0771
- Abstract
- This paper presents a DC link voltage control method to reduce the ripple current and the switching loss in the sinusoidal current drive system for the wide-speed range PMSM. The DC link voltage of the three phase inverter in the sinusoidal current drive system is designed by the back-EMF voltage at maximum speed of the PMSM. In general, the drive systems have used the constant DC link voltage without reference to the motor speed. The current ripple causes hysteresis loss and makes noise. In addition, the switching loss on the inverter increases in proportion to the rise in the DC link voltage. In this paper, we propose the variable DC link voltage control method to reduce the current ripple in the PMSM drive system. We show reduction effect of the current repple and the switching loss through simulation results.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - School of Electronic Engineering > 1. Journal Articles
- Department of Medical IT Convergence Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.