알루미늄 합금 6061에서 와이어 진동부가에 의한 와이어 컷 방전가공에 따른 표면 거칠기 특성(Ⅱ)
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 류청원 | - |
dc.contributor.author | 최성대 | - |
dc.date.accessioned | 2023-12-11T12:30:37Z | - |
dc.date.available | 2023-12-11T12:30:37Z | - |
dc.date.issued | 2015 | - |
dc.identifier.issn | 1598-6721 | - |
dc.identifier.issn | 2288-0771 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23407 | - |
dc.description.abstract | Recently, high-efficiency machining in the production of high-value products with a complex shape has constantly been required with the need for hybrid machining. In this study, in addition to the wire-cut E.D.M. and vibration used to present the possibility of a hybrid process by carrying out the aluminum alloy experiment, the hybrid process determines the nature of the surface. The selected experimental parameters are horizontality, waveform, amplitude, peak current, and frequency. The experimental results give guidelines for selecting reasonable machining parameters. The surface roughness was improved by about 20% with increases in the amplitude of the vibration. | - |
dc.format.extent | 8 | - |
dc.language | 한국어 | - |
dc.language.iso | KOR | - |
dc.publisher | 한국기계가공학회 | - |
dc.title | 알루미늄 합금 6061에서 와이어 진동부가에 의한 와이어 컷 방전가공에 따른 표면 거칠기 특성(Ⅱ) | - |
dc.title.alternative | Characteristics of Surface Roughness According to Wire Vibration Wire-cut Electric Discharge Machining of Aluminum Alloy 6061(II) | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.doi | 10.14775/ksmpe.2015.14.4.100 | - |
dc.identifier.bibliographicCitation | 한국기계가공학회지, v.14, no.4, pp 100 - 107 | - |
dc.citation.title | 한국기계가공학회지 | - |
dc.citation.volume | 14 | - |
dc.citation.number | 4 | - |
dc.citation.startPage | 100 | - |
dc.citation.endPage | 107 | - |
dc.identifier.kciid | ART002018364 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Aluminium Alloy 6061(알루미늄 합금 6061) | - |
dc.subject.keywordAuthor | Wire-cut E.D.M.(와이어 컷 방전가공) | - |
dc.subject.keywordAuthor | Vibration(진동) | - |
dc.subject.keywordAuthor | Horizontality(수평방향) | - |
dc.subject.keywordAuthor | Surface Roughness(표면 거칠기) | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.