TEXTURE DEVELOPMENT AND DRAWABILITY OF FRICTIONALLY ROLLED AA 5052 AL ALLOY SHEET
- Authors
- Kim, Insoo; Akramov, Saidmurod; Jeong, Hae Bong; No, Tae Kyoung
- Issue Date
- 30-Dec-2008
- Publisher
- WORLD SCIENTIFIC PUBL CO PTE LTD
- Keywords
- Frictional rolling; Shear deformation; Pole figure; Texture; Microstructure; Tensile test; Plastic strain ratio; R-value; Drawability; ND//< 111 > texture
- Citation
- INTERNATIONAL JOURNAL OF MODERN PHYSICS B, v.22, no.31-32, pp 5931 - 5936
- Pages
- 6
- Journal Title
- INTERNATIONAL JOURNAL OF MODERN PHYSICS B
- Volume
- 22
- Number
- 31-32
- Start Page
- 5931
- End Page
- 5936
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23868
- DOI
- 10.1142/S021797920805139X
- ISSN
- 0217-9792
1793-6578
- Abstract
- The microstructure, pole figure and r-value of the frictionally rolled and subsequently heat treated AA 5052 Al sheets were investigated by optical microscopy, x-ray diffractometer and tensile tester, respectively. Frictionally rolled AA 5052 Al specimens showed a fine grain size. After subsequently heat treated specimens, the ND//< 111 > texture component was increased. The r-values of the frictionally rolled and subsequently heat treated Al alloy sheets were about two times higher than those of the original Al sheets. These could be related to the formation of ND//< 111 > texture components through frictional rolling in and subsequent heat treatment of AA 5052 Al sheet.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Department of Materials Science and Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.