판상제품의 세라믹 사출 시 공정변수 영향 분석Analysis of the Effect on the Process Parameters for the Thin Ceramic Plate in the Ceramic Injection Molding
- Other Titles
- Analysis of the Effect on the Process Parameters for the Thin Ceramic Plate in the Ceramic Injection Molding
- Authors
- 김진호; 홍석무; 황지훈; 이종찬; 김낙수
- Issue Date
- May-2014
- Publisher
- 한국산학기술학회
- Keywords
- CIM(Ceramic Injection Molding); Flow stress; PIM(Powder Injection Molding); Volume fraction
- Citation
- 한국산학기술학회논문지, v.15, no.5, pp 2587 - 2593
- Pages
- 7
- Journal Title
- 한국산학기술학회논문지
- Volume
- 15
- Number
- 5
- Start Page
- 2587
- End Page
- 2593
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/23971
- DOI
- 10.5762/KAIS.2014.15.5.2587
- ISSN
- 1975-4701
2288-4688
- Abstract
- 세라믹 사출공정(CIM)은 산업 분야 전반에 걸쳐 널리 사용되고 있는 공정 중 하나로, 점차 의료용 전자기기의 부품 등으로 확대 적용되고 있다. 본 연구에서는 FEM 해석을 통해 CIM의 공정변수가 제품의 품질에 미치는 영향을 분석했다. 단순평판 형상의 해석결과를 기초로 구멍이 있는 형상, 모서리부가 둥근 형상 및 측벽 구조가 있는 형상 등과 비교 분석했다. 구멍이 있는 형상의 경우, 구멍 주변에 밀도분포가 고르지 못하며 용접선(weld-line)과 같은 결함이 발생할 수 있음을 예측할 수 있었다. 반면 제품의 모서리부 반경이 크면 성형성 및 유동성이 좋아지는 것을 확인했다. 따라서 CIM 공정변수 뿐만 아니라 제품의 형상변수도 고려해야 한다. 해석결과 온도, 초기분율, 속도 등의 공정변수는 제품의 품질 향상을 위한 중요한 설계변수가 될 수 있음을 확인할 수 있었다.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Department of Mechanical Design Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.