3D Printer로 제작된 인공뼈 구조에 대한 기계적 특성에 관한 연구A Study on the Mechanical Properties of Artificial Bone Structure Fabricated Using a 3D Printer
- Other Titles
- A Study on the Mechanical Properties of Artificial Bone Structure Fabricated Using a 3D Printer
- Authors
- 허영준; 최성대
- Issue Date
- Nov-2020
- Publisher
- 한국기계가공학회
- Keywords
- Artificial Bone(인공뼈); 3D Printing(3차원 프린팅); Mechanical Properties(기계적 성질); Bending Test(굽힘 시험); Bone Structure(뼈 구조)
- Citation
- 한국기계가공학회지, v.19, no.11, pp 35 - 41
- Pages
- 7
- Journal Title
- 한국기계가공학회지
- Volume
- 19
- Number
- 11
- Start Page
- 35
- End Page
- 41
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/25151
- DOI
- 10.14775/ksmpe.2020.19.11.035
- ISSN
- 1598-6721
2288-0771
- Abstract
- The structure of the femur bone was analyzed. Moreover, the mechanical strength of the bone wasdetermined by considering two parameters, namely, the outer wall thickness and inner filling density torealize the 3D printing of a cortical bone and spongy bone by using a fused deposition modeling type 3Dprinter and ABS material. A basic experiment was conducted to evaluate the variation trend in themechanical strength of the test specimens with the change in the parameters. Based on the results, theparameters corresponding to the highest mechanical strength were selected and applied to the artificial bone,and the mechanical strength of the artificial bones was examined under a load. Moreover, we proposed anapproximation method for the 3D printing parameters to enable the comparison of the actual bones andartificial bones in terms of the strength and weight.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - School of Mechanical System Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.