150 LPM 가상임팩터의 최적화 연구Optimization of 150 LPM Virtual Impactor
- Other Titles
- Optimization of 150 LPM Virtual Impactor
- Authors
- 권오찬; 전원영; 이현우; 서영진
- Issue Date
- Oct-2021
- Publisher
- 한국생산제조학회
- Keywords
- Virtual impactor; CFD (computational fluid dynamics); Collection efficiency; Cut-off size; Particle concentration
- Citation
- 한국생산제조학회지, v.30, no.5, pp 359 - 365
- Pages
- 7
- Journal Title
- 한국생산제조학회지
- Volume
- 30
- Number
- 5
- Start Page
- 359
- End Page
- 365
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/25712
- DOI
- 10.7735/ksmte.2021.30.5.359
- ISSN
- 2508-5093
2508-5107
- Abstract
- Numerical studies were performed to design a linear slot virtual impactor with a cut-off size of 1 μm, operating at 150 LPM. A prototype model was designed with a general shape of a virtual impactor, numerical analysis was conducted, and the results were compared to a model with different design parameters.
ANSYS FLUENT was used for numerical analysis, and an RSM model was used to calculate turbulence in the flow field. The particle trajectory was confirmed using DPM, and the collection efficiency and wall loss of particles inside the virtual impactor were calculated. The optimization was conducted by changing the angle and width of the acceleration nozzle. The CFD results show that reducing the angle of acceleration nozzle results in an increased cut-off size and decreased wall loss of large particles (> 4 μm).
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Department of Mechanical Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.