Enhanced energy storage properties and excellent fatigue resistance of Pb-free Bi0.47Na0.376K0.094Ba0.06Nb0.024Ti0.97-x(Ta0.24Sn0.7)(x)O-3 relaxor ceramics
- Authors
- Yadav, Arun Kumar; Yoo, Il-Ryeol; Choi, Seong-Hui; Park, Je-Yeon; Song, Hyun-Cheol; Cho, Kyung-Hoon
- Issue Date
- Nov-2022
- Publisher
- ELSEVIER SCIENCE SA
- Keywords
- Bi0.5Na0.5TiO3-based ceramics; Energy density; Dielectric; Fatigue resistance; Phase transition
- Citation
- JOURNAL OF ALLOYS AND COMPOUNDS, v.923
- Journal Title
- JOURNAL OF ALLOYS AND COMPOUNDS
- Volume
- 923
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/26194
- DOI
- 10.1016/j.jallcom.2022.166324
- ISSN
- 0925-8388
1873-4669
- Abstract
- Pb-free Bi0.47Na0.376K0.094Ba0.06Nb0.024Ti0.97-x(Ta0.24Sn0.7)(x)O-3 perovskite ceramics were prepared using a mixed-oxide reaction technique, and their structural, dielectric, ferroelectric, and energy storage properties were systematically investigated. All the compositions exhibited a pseudo-cubic perovskite crystal structure with a highly dense morphology. The doping of complex ions (Ta0.24Sn0.7)(4+) disturbed the long-range ordering, which reduced the ferroelectric-to-relaxor phase transition temperature to room temperature. Hence, the modified ceramics exhibited relaxor behavior in their polarization and current density versus applied field plots. Owing to the excellent field-induced ferroelectricity and facile reversibility of ferroelectric-relaxor phase transition of polar nanoregions (PNRs), a high recoverable energy density of 1.65 J/cm(3) with a good efficiency of 77.69% was achieved under 125 kV/cm at x = 0.03. In addition, the ceramic with x = 0.03 showed a high recoverable energy density of 1.01 J/cm(3) with a high conversion efficiency of 84.22% at 70 degrees C under 80 kV/cm and fatigue-free characteristics during 10(5) cycles, demonstrating the highly dynamic and very stable nature of PNRs and very few ionic defects in the grains. Therefore, such ceramics (x = 0.03) are expected to be suitable for high-energy-density materials in electronic industries. (C) 2022 Published by Elsevier B.V.
- Files in This Item
-
- Appears in
Collections - Department of Materials Science and Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.