입력성형기법 적용을 통한 머시닝센터의 가공 정밀도 개선에 관한 연구A Study on the Improvement of Machining Precision by Applying Input Shaping Method to Machining Center
- Other Titles
- A Study on the Improvement of Machining Precision by Applying Input Shaping Method to Machining Center
- Authors
- 고강호; 임동욱; 홍성욱
- Issue Date
- Aug-2023
- Publisher
- 한국생산제조학회
- Keywords
- Input shaping; Machining precision; Machining center; Multi-mode input shaper; Circular interpolation
- Citation
- 한국생산제조학회지, v.32, no.4, pp 189 - 197
- Pages
- 9
- Journal Title
- 한국생산제조학회지
- Volume
- 32
- Number
- 4
- Start Page
- 189
- End Page
- 197
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/26414
- ISSN
- 2508-5093
2508-5107
- Abstract
- Recently, machining centers have been actively adopting high-speed positioning systems to enhance operational efficiency and productivity. This study focuses on applying input shaping techniques to a machining center to improve the machining precision. Simulations were performed using a minimal impulse input shaper on a two-axis stage, considering its anisotropic characteristics. A comparative analysis was performed to assess the effectiveness of input shaping by varying the material, feed rate, reduction ratio, and depth of cut. The machined specimens were measured using a digital microscope, surface roughness tester, and an image dimension measurement device. Successful experiments were conducted to demonstrate the improved processing quality of the machining center during combined linear and circular cutting processes. Both the simulations and experiments confirmed the significant effectiveness of the proposed method in enhancing the machining precision of the machining center.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - School of Mechanical System Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.