수계 PUA/PEGDMA 혼합 올리고머 레진에 의한 DLP 3D 프린팅 결과물의 기계적 물성 향상 및 레진 희석액의 여과특성 분석Improvement of Mechanical Properties of DLP 3D Printouts Using Waterborne PUA/PEGDMA Mixed Oligomer Resin and Analysis of Filtration Characteristics of Resin Dilution
- Other Titles
- Improvement of Mechanical Properties of DLP 3D Printouts Using Waterborne PUA/PEGDMA Mixed Oligomer Resin and Analysis of Filtration Characteristics of Resin Dilution
- Authors
- 황보현우; 전석진
- Issue Date
- Jan-2022
- Publisher
- 한국고분자학회
- Keywords
- digital light processing; 3D printing; waterborne resin; polyurethane acrylate; poly(ethylene glycol) dimethacrylate.; .
- Citation
- 폴리머, v.46, no.1, pp 30 - 35
- Pages
- 6
- Journal Title
- 폴리머
- Volume
- 46
- Number
- 1
- Start Page
- 30
- End Page
- 35
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/26443
- DOI
- 10.7317/pk.2022.46.1.30
- ISSN
- 0379-153X
2234-8077
- Abstract
- 본 연구에서는 상용 수계 polyurethane acrylate(PUA)와 poly(ethylene glycol) dimethacrylate(PEGDMA) 기반의 수계 레진을 digital light processing(DLP) 방식으로 3D 프린팅하였다. 출력물의 기계적 물성 조사를 통해 PUA와 PEGDMA를 모두 포함하는 경우 단일 올리고머 레진에 비해 높은 기계적 물성을 나타냄을 확인하였다. 출력물은 물 세척만으로 표면 잔류 레진이 모두 제거되었고, 세척폐액의 수질오염에 대한 영향을 비교하기 위해 레진 희석액 내 부유물의 크기 분포 및 여과효과를 조사한 결과 모든 레진 조성물에서 0.45 μm 공극 필터에 의해 부유물이 1/3 미만으로 감소함을 확인하였다. 물 세척이 가능하며 여과에 의해 세척액 내 부유물의 효과적인 제거가 가능한 수계 레진은 수질오염을 저감하여 DLP 3D 프린팅의 보급에 기여할 것으로 예상한다.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - ETC > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.