실험계획법을 이용한 사출품의 균일 수축을 위한 성형 설계인자의 최적화Molding Design Factors Optimization for Maximizing Shrinkage Uniformity of Injection Molded Part using Design of Experiments
- Other Titles
- Molding Design Factors Optimization for Maximizing Shrinkage Uniformity of Injection Molded Part using Design of Experiments
- Authors
- 박종천; 김경모; 인정제; 이재훈
- Issue Date
- 2011
- Publisher
- 한국기계가공학회
- Keywords
- Warpage(휨); Volumetric Shrinkage(체적수축); Design of Experiments(실험계획법); Orthogonal Arrays(직교배열); Injection Molding(사출성형); Warpage(휨); Volumetric Shrinkage(체적수축); Design of Experiments(실험계획법); Orthogonal Arrays(직교배열); Injection Molding(사출성형)
- Citation
- 한국기계가공학회지, v.10, no.6, pp.70 - 76
- Journal Title
- 한국기계가공학회지
- Volume
- 10
- Number
- 6
- Start Page
- 70
- End Page
- 76
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/2715
- ISSN
- 1598-6721
- Abstract
- This paper presents an optimization procedure for reducing warpage of injection molded part by using a volumetric shrinkage deviation as an objective function. A design of experiments based on orthogonal arrays was used in the optimization procedure, and the entire optimization was performed through a two stage process - a preliminary experimentation and a principal experimentation. Proposed optimization method was applied to the design of a CPU-base part in computer. With the moderate number of experiments, an optimal molding condition for uniform distribution of volumetric shrinkage was obtained, as a result, the warpage of the molded part was significantly reduced.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - School of Industrial Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.