스러스트 내면 연삭가공의 가공면 정도에 관한 연구A Study on the Precision of a Machined Surface in Thrust Internal Grinding
- Other Titles
- A Study on the Precision of a Machined Surface in Thrust Internal Grinding
- Authors
- 최환; 서창연; 서영일; 이충석
- Issue Date
- May-2016
- Publisher
- 한국기계가공학회
- Keywords
- Thrust Internal Grinding(스러스트 내면 연삭); Shape of Machined Surface(가공면 형상); Machining Error(가공오차); Surface Roughness(표면거칠기); Grinding Force(연삭력)
- Citation
- 한국기계가공학회지, v.15, no.5, pp 73 - 79
- Pages
- 7
- Journal Title
- 한국기계가공학회지
- Volume
- 15
- Number
- 5
- Start Page
- 73
- End Page
- 79
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/27677
- DOI
- 10.14775/ksmpe.2016.15.5.073
- ISSN
- 1598-6721
2288-0771
- Abstract
- In this paper, the grinding characteristics in thrust internal grinding have been studied using vitreous CBNwheels with a machining center. Grinding experiments have been performed according to grinding conditionssuch as wheel feed speed, cut depth, workpiece speed, rate of grinding width and number of grinding passes.
The machining error, shape of machined surfaces, grinding force, and surface roughness have beeninvestigated though these experiments. Based on the experimental results, the grinding characteristics on themachined surface in the internal thrust grinding are discussed.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - ETC > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.