3D 프린팅을 활용한 재료조합에 따른 온습도 변화 분석
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이희란 | - |
dc.contributor.author | 김소영 | - |
dc.contributor.author | 이예진 | - |
dc.contributor.author | 이옥경 | - |
dc.date.accessioned | 2024-02-27T16:31:36Z | - |
dc.date.available | 2024-02-27T16:31:36Z | - |
dc.date.issued | 2022-02 | - |
dc.identifier.issn | 1229-2060 | - |
dc.identifier.issn | 2298-5743 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/28225 | - |
dc.description.abstract | Recently, various clothing items are being developed using 3D printing technology, but comfort has becomean issue while wearing them for a long time. Therefore, this study researched on how the temperature and humidity ofthe devices developed by 3D printing change depending on the material combination. Five types of material combinations (EVA foam, TPU density 10%, TPU density 30%, EVA foam+TPU density 10%, and EVA foam+TPU density 30%) were selected as variables, and the experiment was conducted for two different cases with and without a cover. All the ten types of samples were placed on the hot plate set at 36oC, and the surface temperature and humidity were measured at three different points for 10 minutes. As a result, the case with only TPU showed the greatest temperature change while the case with 100% EVA foam showed the least temperature change. The humidity of the surface layer gradually decreased with time for 100% EVA foam. For the case with TPU materials, the moisture was transferred to the surface layer at first, thereby increasing the humidity but then dropped significantly. Meanwhile, the cases with the cover on showed similar tendencies of change in both temperature and humidity where the overall temperature and humidity delivery were slow. | - |
dc.format.extent | 11 | - |
dc.language | 한국어 | - |
dc.language.iso | KOR | - |
dc.publisher | 한국의류산업학회 | - |
dc.title | 3D 프린팅을 활용한 재료조합에 따른 온습도 변화 분석 | - |
dc.title.alternative | Analysis of Changes in Temperature and Humidity by Material Combination Using 3D Printing | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.bibliographicCitation | 한국의류산업학회지, v.24, no.1, pp 127 - 137 | - |
dc.citation.title | 한국의류산업학회지 | - |
dc.citation.volume | 24 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 127 | - |
dc.citation.endPage | 137 | - |
dc.identifier.kciid | ART002818617 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | 3Dprinting | - |
dc.subject.keywordAuthor | Ethylene-vinyl acetate foam | - |
dc.subject.keywordAuthor | Thermoplastic Polyurethane | - |
dc.subject.keywordAuthor | surface temperature | - |
dc.subject.keywordAuthor | surface humidity | - |
dc.subject.keywordAuthor | thermal comfort | - |
dc.subject.keywordAuthor | 3D 프린팅 | - |
dc.subject.keywordAuthor | EVA폼 | - |
dc.subject.keywordAuthor | TPU | - |
dc.subject.keywordAuthor | 표면온도 | - |
dc.subject.keywordAuthor | 표면습도 | - |
dc.subject.keywordAuthor | 열쾌적성 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.