3D 프린팅을 활용한 재료조합에 따른 온습도 변화 분석Analysis of Changes in Temperature and Humidity by Material Combination Using 3D Printing
- Other Titles
- Analysis of Changes in Temperature and Humidity by Material Combination Using 3D Printing
- Authors
- 이희란; 김소영; 이예진; 이옥경
- Issue Date
- Feb-2022
- Publisher
- 한국의류산업학회
- Keywords
- 3Dprinting; Ethylene-vinyl acetate foam; Thermoplastic Polyurethane; surface temperature; surface humidity; thermal comfort; 3D 프린팅; EVA폼; TPU; 표면온도; 표면습도; 열쾌적성
- Citation
- 한국의류산업학회지, v.24, no.1, pp 127 - 137
- Pages
- 11
- Journal Title
- 한국의류산업학회지
- Volume
- 24
- Number
- 1
- Start Page
- 127
- End Page
- 137
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/28225
- ISSN
- 1229-2060
2298-5743
- Abstract
- Recently, various clothing items are being developed using 3D printing technology, but comfort has becomean issue while wearing them for a long time. Therefore, this study researched on how the temperature and humidity ofthe devices developed by 3D printing change depending on the material combination. Five types of material combinations (EVA foam, TPU density 10%, TPU density 30%, EVA foam+TPU density 10%, and EVA foam+TPU density 30%) were selected as variables, and the experiment was conducted for two different cases with and without a cover. All the ten types of samples were placed on the hot plate set at 36oC, and the surface temperature and humidity were measured at three different points for 10 minutes. As a result, the case with only TPU showed the greatest temperature change while the case with 100% EVA foam showed the least temperature change. The humidity of the surface layer gradually decreased with time for 100% EVA foam. For the case with TPU materials, the moisture was transferred to the surface layer at first, thereby increasing the humidity but then dropped significantly. Meanwhile, the cases with the cover on showed similar tendencies of change in both temperature and humidity where the overall temperature and humidity delivery were slow.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - ETC > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/28225)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.