필터 프레싱으로 제조한 대형 알루미나 세라믹스 성형체 및 소결체의 특성Characteristics of Large Green and Sintered Alumina Ceramics by Filter Pressing
- Other Titles
- Characteristics of Large Green and Sintered Alumina Ceramics by Filter Pressing
- Authors
- 이현권; 조경식; 장민혁; 장철우; 김상모; 김미영
- Issue Date
- 2009
- Publisher
- 한국세라믹학회
- Keywords
- Alumina; Filter pressing; Pressure forming; Microstructure; Sinterability
- Citation
- 한국세라믹학회지, v.46, no.3, pp.306 - 312
- Journal Title
- 한국세라믹학회지
- Volume
- 46
- Number
- 3
- Start Page
- 306
- End Page
- 312
- URI
- https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/2872
- ISSN
- 1229-7801
- Abstract
- The size of various alumina ceramics used in semiconductor and display industry is also required to increase with increase in wafer and panel size. In this research, large alumina ceramics was fabricated by filter pressing of alumina slurry using commercial powder and thereafter sintering at 1600℃ in gas furnace. The characteristics of large alumina ceramics thereby were compared to those of small alumina ceramics prepared by pressure forming such as uniaxial pressing and CIP. Careful control of properties of alumina slurry and filter pressing made the fabrication of large alumina ceramics possible, and its characteristics were equivalent to those of small alumina ceramics. The large alumina ceramics, prepared by sintering the green body of 63% relative density at 1600℃, exhibited both dense microstructure corresponding to 98.5% of relative density and 99.8% of high purity as in starting powder.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - Department of Materials Science and Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.