기어 가공용 연삭 휠의 가공 특성 분석과최적 가공조건 도출에 관한 연구
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 이강수 | - |
dc.contributor.author | 양동호 | - |
dc.contributor.author | 이상협 | - |
dc.contributor.author | 이종찬 | - |
dc.date.accessioned | 2024-10-04T09:00:21Z | - |
dc.date.available | 2024-10-04T09:00:21Z | - |
dc.date.issued | 2024-08 | - |
dc.identifier.issn | 1598-6721 | - |
dc.identifier.issn | 2288-0771 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/kumoh/handle/2020.sw.kumoh/28895 | - |
dc.description.abstract | Gears are crucial components of mechanical systems that transmit and convert power, ranging from smallwatches to large gears transmitting tens of thousands of horsepower. Gears have long been used fordeceleration and power transmission. Cars, being closely related to daily life, require safety, economy, andconvenience. Additionally, depending on the manufacturing process and purpose of use, gears used in carsneed to be lightweight, highly durable, precise, strong, and low-noise. With the increasing adoption of electricvehicles, achieving high precision and low noise in electric vehicle motors and transmissions has becomeparamount. Therefore, the super-finishing process is widely applied to most decelerators and transmissions. However, hybrid polishing tools for the super-finishing process are entirely dependent on imports. This studyaims to analyze the machining efficiency and tool life of grinding wheels to develop localized grinding andsuper-finishing tools. Through this analysis, the study intends to determine the feasibility of localizing theproduction of these tools. | - |
dc.format.extent | 8 | - |
dc.language | 한국어 | - |
dc.language.iso | KOR | - |
dc.publisher | 한국기계가공학회 | - |
dc.title | 기어 가공용 연삭 휠의 가공 특성 분석과최적 가공조건 도출에 관한 연구 | - |
dc.title.alternative | A Study on the Analysis of Machining Characteristics and Derivation of Optimal Machining Conditions of Grinding Wheel for Gear Grinding | - |
dc.type | Article | - |
dc.publisher.location | 대한민국 | - |
dc.identifier.doi | 10.14775/ksmpe.2024.23.08.016 | - |
dc.identifier.bibliographicCitation | 한국기계가공학회지, v.23, no.8, pp 16 - 23 | - |
dc.citation.title | 한국기계가공학회지 | - |
dc.citation.volume | 23 | - |
dc.citation.number | 8 | - |
dc.citation.startPage | 16 | - |
dc.citation.endPage | 23 | - |
dc.identifier.kciid | ART003108164 | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | kci | - |
dc.subject.keywordAuthor | Grinding(연삭) | - |
dc.subject.keywordAuthor | Grinding Wheel (연삭 휠) | - |
dc.subject.keywordAuthor | Gear (기어 ) | - |
dc.subject.keywordAuthor | Grinding Force (연삭저항력) | - |
dc.subject.keywordAuthor | Surface Roughness(표면거칠기) | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
350-27, Gumi-daero, Gumi-si, Gyeongsangbuk-do, Republic of Korea (39253)054-478-7170
COPYRIGHT 2020 Kumoh University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.