Ultrasonic Deposit Junction Characteristic Evaluation of Metal Sheets Al/Al and Al/Cu
- Authors
- Seo, Jeong-Seok; Beck, Si Young
- Issue Date
- Aug-2011
- Publisher
- 대한금속·재료학회
- Keywords
- metals; welding; diffusion; ultrasonic; weldability
- Citation
- 대한금속·재료학회지, v.49, no.8, pp 642 - 648
- Pages
- 7
- Journal Title
- 대한금속·재료학회지
- Volume
- 49
- Number
- 8
- Start Page
- 642
- End Page
- 648
- URI
- https://scholarworks.bwise.kr/sch/handle/2021.sw.sch/16316
- DOI
- 10.3365/KJMM.2011.49.8.642
- ISSN
- 1738-8228
2288-8241
- Abstract
- This paper describes an experimental study on ultrasonic welding of similar and dissimilar metals. There are optimum welding conditions which are found for welding of Al/Al and Al/Cu. It evaluated weldability using tensile test, SEM observation and EDX-ray analysis. Both ultrasonic welding of Al/Al and Al/Cu have amplitude as the variable factor. Al/Cu welding was examined again with welding time as variable factor to find the best conditions. The more welding time or amplitude increase, the better weldability. The optimum conditions for ultrasonic welding of Al/Al were formed at pressure 0.25 MPa, welding time 0.25 sec, amplitude 90%. Pressure 0.25 MPa, welding time 0.4 sec, amplitude 80% are optimized for Al/Cu ultrasonic metal welding and solid-state diffusion generated by ultrasonic vibration and frictional heat is confirmed at the welded interface.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - ETC > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/sch/handle/2021.sw.sch/16316)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.