The Removal of CuO Nanoparticles from Water by Conventional Treatment C/F/S: The Effect of pH and Natural Organic Matter

Abstract

The increased use of engineered nanoparticles (ENPs), such as copper oxide nanoparticles (CuO NPs), in commercial products and applications raises concern regarding their possible release into freshwater sources. Therefore, their removal from water is important to eliminate adverse environmental and human health effects. In this study, the effects of pH and natural organic matter (NOM), i.e., humic acid (HA) and salicylic acid (SA) on the removal of CuO NPs by coagulation/flocculation/sedimentation (C/F/S) were evaluated. The results indicated that pH significantly affects the coagulation efficiency, where 10⁻60% CuO NPs removal was achieved under extreme acidic/alkaline conditions. However, at neutral pH, removal of up to 90% was observed with a lower ferric chloride (FC) dosage (0.2 mM). The coagulation efficiency and mechanism were strongly affected by the type of Fe species present in the aqueous phase, which is mainly controlled by pH. Higher concentrations of both HA and SA decrease the CuO NPs agglomeration rate, and thereby improve the colloidal stability due to the NOM molecules adsorbed onto the NPs surface. The presence of hydrophobic HA needs a higher FC dosage of 0.5⁻0.8 mM than a dosage of hydrophilic SA of 0.25⁻0.35 mM, to obtain a similar CuO coagulation efficiency. Moreover, higher removals of dissolved organic carbon (DOC) and UV254 were observed more in hydrophobic NOM than in hydrophilic. The results of the Fourier transform infrared (FT-IR) analysis of FC composite flocs confirm that the charge neutralization and enmeshment of coagulant might be a possible removal mechanism. The findings of the current study may provide critical information in the prediction of the fate, mobility, and removal of CuO NPs during C/F/S in water treatment.