Influence of coating on mechanical performance of lap-spliced carbon fiber-textile reinforced mortar (Trm)
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Truong, G.T. | - |
dc.contributor.author | Dinh, N.H. | - |
dc.contributor.author | Park, S.-H. | - |
dc.contributor.author | Lee, S.-J. | - |
dc.contributor.author | Kim, J.-Y. | - |
dc.contributor.author | Choi, K.-K. | - |
dc.date.available | 2021-02-16T06:40:25Z | - |
dc.date.created | 2020-11-02 | - |
dc.date.issued | 2019-04 | - |
dc.identifier.issn | 0255-5476 | - |
dc.identifier.uri | http://scholarworks.bwise.kr/ssu/handle/2018.sw.ssu/40260 | - |
dc.description.abstract | In this study, the effect of coating methods in the lap splice area on mechanical performance of lap-spliced carbon textile reinforced mortar (TRM) composites was investigated. The coating methods included textile reinforcement coated with epoxy, textile reinforcement coated with aluminum oxide powder and epoxy, and textile reinforcement coated with aluminum oxide powder, epoxy, and carbon fiber fabrics. It appears that the coated specimens showed higher peak strength and ultimate strain than those of the uncoated one. © 2019 Trans Tech Publications Ltd, Switzerland. | - |
dc.language | 영어 | - |
dc.language.iso | en | - |
dc.publisher | Trans Tech Publications Ltd | - |
dc.relation.isPartOf | Materials Science Forum | - |
dc.title | Influence of coating on mechanical performance of lap-spliced carbon fiber-textile reinforced mortar (Trm) | - |
dc.type | Article | - |
dc.identifier.doi | 10.4028/www.scientific.net/MSF.972.64 | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | Materials Science Forum, v.972 MSF, pp.64 - 68 | - |
dc.description.journalClass | 1 | - |
dc.identifier.scopusid | 2-s2.0-85089718311 | - |
dc.citation.endPage | 68 | - |
dc.citation.startPage | 64 | - |
dc.citation.title | Materials Science Forum | - |
dc.citation.volume | 972 MSF | - |
dc.contributor.affiliatedAuthor | Choi, K.-K. | - |
dc.type.docType | Conference Paper | - |
dc.description.isOpenAccess | N | - |
dc.subject.keywordAuthor | Alumina cement | - |
dc.subject.keywordAuthor | Carbon fibers | - |
dc.subject.keywordAuthor | Coating | - |
dc.subject.keywordAuthor | Lap splice | - |
dc.subject.keywordAuthor | Tensile test | - |
dc.subject.keywordAuthor | Textile reinforced mortar | - |
dc.subject.keywordPlus | Alumina | - |
dc.subject.keywordPlus | Aluminum oxide | - |
dc.subject.keywordPlus | Architectural design | - |
dc.subject.keywordPlus | Carbon fibers | - |
dc.subject.keywordPlus | Mortar | - |
dc.subject.keywordPlus | Reinforcement | - |
dc.subject.keywordPlus | Textiles | - |
dc.subject.keywordPlus | Aluminum oxide powders | - |
dc.subject.keywordPlus | Carbon fiber fabrics | - |
dc.subject.keywordPlus | Coating methods | - |
dc.subject.keywordPlus | Mechanical performance | - |
dc.subject.keywordPlus | Peak strength | - |
dc.subject.keywordPlus | Textile reinforcement | - |
dc.subject.keywordPlus | Textile-reinforced mortars | - |
dc.subject.keywordPlus | Ultimate strain | - |
dc.subject.keywordPlus | Aluminum coatings | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
Soongsil University Library 369 Sangdo-Ro, Dongjak-Gu, Seoul, Korea (06978)02-820-0733
COPYRIGHT ⓒ SOONGSIL UNIVERSITY, ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.