Numerical study on subcooled water jet impingement cooling on superheated surfaces
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Moon, J.H. | - |
dc.contributor.author | Lee, S. | - |
dc.contributor.author | Lee, J. | - |
dc.contributor.author | Lee, S.H. | - |
dc.date.accessioned | 2022-05-16T07:40:13Z | - |
dc.date.available | 2022-05-16T07:40:13Z | - |
dc.date.issued | 2022-04 | - |
dc.identifier.issn | 2214-157X | - |
dc.identifier.uri | https://scholarworks.bwise.kr/cau/handle/2019.sw.cau/57684 | - |
dc.description.abstract | The present study aims to numerically investigate the rapid cooling heat transfer characteristics of the superheated solid surfaces when the subcooled water jet impinges. The computational fluid dynamics (CFD) simulation was carried out by considering boiling and condensation heat transfer to estimate key design parameters such as wall heat flux, heat transfer coefficient, and surface temperature variation using the volume-of-fluid (VOF) model. The simulated results agreed well with the experimental data of the surface temperature and the wall heat flux at the stagnation point. The water vapors formed near the stagnation point and rapidly propagated radially after impact. Also, strong vorticity was found in a radial direction, resulting in a vapor blanket. The result showed that the vapor blanket prevented the liquid flows from directly contacting the heated surface, decreasing the heat transfer. In particular, the surface temperature in the radial direction cooled down more rapidly than that in the vertical direction because of higher boiling heat transfer within a wetting radius where the heat transfer coefficient became higher owing to the liquid wetting. © 2022 The Authors | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | Elsevier Ltd | - |
dc.title | Numerical study on subcooled water jet impingement cooling on superheated surfaces | - |
dc.type | Article | - |
dc.identifier.doi | 10.1016/j.csite.2022.101883 | - |
dc.identifier.bibliographicCitation | Case Studies in Thermal Engineering, v.32 | - |
dc.description.isOpenAccess | N | - |
dc.identifier.wosid | 000797202300004 | - |
dc.identifier.scopusid | 2-s2.0-85126757103 | - |
dc.citation.title | Case Studies in Thermal Engineering | - |
dc.citation.volume | 32 | - |
dc.type.docType | Article | - |
dc.publisher.location | 네델란드 | - |
dc.subject.keywordAuthor | Boiling | - |
dc.subject.keywordAuthor | Computational fluid dynamics | - |
dc.subject.keywordAuthor | Heat flux | - |
dc.subject.keywordAuthor | Subcooled water jet impingement | - |
dc.relation.journalResearchArea | Thermodynamics | - |
dc.relation.journalWebOfScienceCategory | Thermodynamics | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
84, Heukseok-ro, Dongjak-gu, Seoul, Republic of Korea (06974)02-820-6194
COPYRIGHT 2019 Chung-Ang University All Rights Reserved.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.