Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
Aging treatment characteristics of shear strength in micro solder bump
- Issue Date
- Dec-2002
- Publisher
- JAPAN INST METALS
- Keywords
- solder bump; shear strength; aging; intermetallic compound; transmission electron microscope
- Citation
- MATERIALS TRANSACTIONS, v.43, no.12, pp 3234 - 3238
- Pages
- 5
- Journal Title
- MATERIALS TRANSACTIONS
- Volume
- 43
- Number
- 12
- Start Page
- 3234
- End Page
- 3238
- ISSN
- 1345-9678
1347-5320
- Abstract
- The shear strength of the Cr/Cr-Cu/Cu UBM structure in both the high-melting solder bump and low-melting solder bump after aging were evaluated. SEM and TEM were examined in the intermetallic compounds and bump joint profiles at the interface between solder and UBM. The shear load concentrated on the bump was analyzed by finite element method. In 900-hour aging experiments, the maximum shear strength of Sn-97 mass% Pb and Sn-37 mass% Pb decreased by 25% and 20%, respectively. The growth of Cu6Sn5 and Cu3Sn was ascertained by the aging treatment. The crack path changes from the interior of a solder to the intermetallic compound interface was evaluated. Compared with the Cu-Sn IMC, the amount of Ni-Sn IMC was small. The Ni layer is considered as the diffusion barrier.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Natural Sciences > Department of Physics > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.