High-Efficiency Module Design of Solid-State Transformers for Railway Vehicles
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Lee, Eun S. | - |
dc.contributor.author | Park, Jin H. | - |
dc.contributor.author | Kim, Myung Y. | - |
dc.contributor.author | Lee, June S. | - |
dc.date.accessioned | 2022-07-18T01:18:36Z | - |
dc.date.available | 2022-07-18T01:18:36Z | - |
dc.date.issued | 2022-03 | - |
dc.identifier.issn | 2332-7782 | - |
dc.identifier.uri | https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/107936 | - |
dc.description.abstract | The solid-state transformer (SST) can be a promising solution to replace the conventional 50- or 60-Hz main transformer (MTr) for railway vehicles. Unlike the existing SST technologies for stationary power applications, the SST applied to railway vehicles requires severe constraint of installation space and intensive management of heat dissipation. To optimally design the SST module applied to the railway vehicles, which is one of the major components in the whole SST system, the optimal magnetic component designs for high-efficiency and thermal stable operations in the confined installation space are proposed in this article. In order to meet the SST system requirements for ac 25-kV-to-dc 1.5-kV power conversion, an overall SST topology and its control schemes are established. Based on the proposed SST topology, considering the operating drive profile of the urban railway vehicles, the operating sequence of the proposed SST is introduced and verified by simulation. By virtue of the proposed magnetic component design, the optimal number of turns for the inductor and transformer in dual-active-bridge converters can be appropriately determined for 50-kV high-voltage insulation and high-efficiency operation when the installation space for the magnetic components is given. For targeting the 3.0-MW maximum power transfer capability of the proposed SST system, the 300-kW SST modules, operating at 500 Hz and 10 kHz for ac/dc converters and dc/dc converters, respectively, were fabricated and verified by experiment. By two experimental SST module sets, the static performance of the power converters in the SST module and the dynamic operating sequence has been successfully implemented. For the 300-kW full-load operation, 99.7% of power transfer efficiency for the proposed magnetic components and 97.2% of total power efficiency were obtained. As a result, the measured temperature characteristics for the proposed SST module, including the magnetic components, were managed below 125 degrees C under a severe experimental environment. | - |
dc.format.extent | 23 | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | IEEE | - |
dc.title | High-Efficiency Module Design of Solid-State Transformers for Railway Vehicles | - |
dc.type | Article | - |
dc.publisher.location | 미국 | - |
dc.identifier.doi | 10.1109/TTE.2021.3101733 | - |
dc.identifier.scopusid | 2-s2.0-85112651400 | - |
dc.identifier.wosid | 000792985000012 | - |
dc.identifier.bibliographicCitation | IEEE Transactions on Transportation Electrification, v.8, no.1, pp 98 - 120 | - |
dc.citation.title | IEEE Transactions on Transportation Electrification | - |
dc.citation.volume | 8 | - |
dc.citation.number | 1 | - |
dc.citation.startPage | 98 | - |
dc.citation.endPage | 120 | - |
dc.type.docType | Article | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Engineering | - |
dc.relation.journalResearchArea | Transportation | - |
dc.relation.journalWebOfScienceCategory | Engineering, Electrical & Electronic | - |
dc.relation.journalWebOfScienceCategory | Transportation Science & Technology | - |
dc.subject.keywordPlus | POWER | - |
dc.subject.keywordPlus | CHALLENGES | - |
dc.subject.keywordAuthor | Rail transportation | - |
dc.subject.keywordAuthor | AC-DC power converters | - |
dc.subject.keywordAuthor | Switches | - |
dc.subject.keywordAuthor | Magnetic switching | - |
dc.subject.keywordAuthor | Magnetic resonance | - |
dc.subject.keywordAuthor | Topology | - |
dc.subject.keywordAuthor | Power transformer insulation | - |
dc.subject.keywordAuthor | Dual-active-bridge (DAB) | - |
dc.subject.keywordAuthor | magnetic component design | - |
dc.subject.keywordAuthor | railway vehicles | - |
dc.subject.keywordAuthor | solid-state transformer (SST) | - |
dc.identifier.url | https://ieeexplore.ieee.org/document/9503391/ | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
55 Hanyangdeahak-ro, Sangnok-gu, Ansan, Gyeonggi-do, 15588, Korea+82-31-400-4269 sweetbrain@hanyang.ac.kr
COPYRIGHT © 2021 HANYANG UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.