Interlaminar Shear Behavior of Thick Carbon/Epoxy Composite Materials
DC Field | Value | Language |
---|---|---|
dc.contributor.author | Oh, Je Hoon | - |
dc.contributor.author | Kim, Jin Kook | - |
dc.contributor.author | Lee, Dai Gil | - |
dc.contributor.author | Jeong, Kwang Seop | - |
dc.date.accessioned | 2023-07-05T05:37:40Z | - |
dc.date.available | 2023-07-05T05:37:40Z | - |
dc.date.issued | 1999-11 | - |
dc.identifier.issn | 0021-9983 | - |
dc.identifier.issn | 1530-793X | - |
dc.identifier.uri | https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/113078 | - |
dc.description.abstract | The interlaminar shear behavior of thick carbon/epoxy composite laminates was investigated using the Iosipescu shear test. In order to manufacture thick test specimens, both the conventional autoclave cure cycle recommended by prepreg manufacturer and the modified autoclave cure cycle incorporating cooling and reheating steps were used. A 3-dimensional linear finite element analysis was performed to assess the uniformity of the shear stress field in the test section as well as to predict the failure mode of the specimen. For more accurate analysis of the stress field, contact elements were used between the specimen and the fixture, and the shear stress field in the thickness direction was taken into account. From the analysis, the failure region in the specimen was predicted and the correction factor was calculated to compensate for the non-uniformity of the shear stress field in the gage section. From the shear test, the interlaminar shear strength and shear modulus were obtained, and the interlaminar properties of the specimens manufactured by the conventional autoclave cure cycle were compared with those of the specimens manufactured by the modified autoclave cure cycle. | - |
dc.format.extent | 36 | - |
dc.language | 영어 | - |
dc.language.iso | ENG | - |
dc.publisher | SAGE Publications Ltd | - |
dc.title | Interlaminar Shear Behavior of Thick Carbon/Epoxy Composite Materials | - |
dc.type | Article | - |
dc.publisher.location | 영국 | - |
dc.identifier.doi | 10.1177/002199839903302202 | - |
dc.identifier.scopusid | 2-s2.0-0000042625 | - |
dc.identifier.wosid | 000084158100002 | - |
dc.identifier.bibliographicCitation | Journal of Composite Materials, v.33, no.22, pp 2080 - 2115 | - |
dc.citation.title | Journal of Composite Materials | - |
dc.citation.volume | 33 | - |
dc.citation.number | 22 | - |
dc.citation.startPage | 2080 | - |
dc.citation.endPage | 2115 | - |
dc.type.docType | Article | - |
dc.description.isOpenAccess | N | - |
dc.description.journalRegisteredClass | scie | - |
dc.description.journalRegisteredClass | scopus | - |
dc.relation.journalResearchArea | Materials Science | - |
dc.relation.journalWebOfScienceCategory | Materials Science, Composites | - |
dc.subject.keywordPlus | IOSIPESCU SPECIMEN | - |
dc.subject.keywordPlus | NUMERICAL-ANALYSIS | - |
dc.subject.keywordPlus | INPLANE | - |
dc.subject.keywordPlus | FIXTURE | - |
dc.subject.keywordAuthor | Autoclave cure cycle | - |
dc.subject.keywordAuthor | Correction factor | - |
dc.subject.keywordAuthor | Finite element analysis | - |
dc.subject.keywordAuthor | Interlaminar shear test | - |
dc.subject.keywordAuthor | Iosipescu | - |
dc.subject.keywordAuthor | Thick carbon/epoxy composite | - |
dc.identifier.url | https://journals.sagepub.com/doi/abs/10.1177/002199839903302202 | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
55 Hanyangdeahak-ro, Sangnok-gu, Ansan, Gyeonggi-do, 15588, Korea+82-31-400-4269 sweetbrain@hanyang.ac.kr
COPYRIGHT © 2021 HANYANG UNIVERSITY. ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.