A Face-Shear Mode Piezoelectric Array Sensor for Elasticity and Force Measurementopen access
- Authors
- Kim, Kyungrim; Kim, Taeyang; Kim, Jinwook; Jiang, Xiaoning
- Issue Date
- Feb-2020
- Publisher
- Multidisciplinary Digital Publishing Institute (MDPI)
- Keywords
- Elasticity sensor; Face-shear mode; Force sensor; Piezoelectric array sensor; PMN; PT
- Citation
- Sensors, v.20, no.3, pp 1 - 13
- Pages
- 13
- Indexed
- SCIE
SCOPUS
- Journal Title
- Sensors
- Volume
- 20
- Number
- 3
- Start Page
- 1
- End Page
- 13
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/118572
- DOI
- 10.3390/s20030604
- ISSN
- 1424-8220
1424-3210
- Abstract
- We present the development of a 6 × 6 piezoelectric array sensor for measuring elasticity and force. The proposed sensor employs an impedance measurement technique, sensing the acoustic load impedance of a target by measuring the electrical impedance shift of face-shear mode PMN–PT (lead magnesium niobate–lead titanate) single crystal elements. Among various modes of PMN–PT single crystals, the face-shear mode was selected due to its especially high sensitivity to acoustic loads. To verify the elasticity sensing performance, gelatin samples with different elastic moduli were prepared and tested. For the force measurement test, different magnitudes of force were loaded to the sensing layer whose acoustic impedance was varied with applied forces. From the experimental results, the fabricated sensor showed an elastic stiffness sensitivity of 23.52 Ohm/MPa with a resolution of 4.25 kPa and contact force sensitivity of 19.27 Ohm/N with a resolution of 5.19 mN. In addition, the mapping experiment of elasticity and force using the sensor array was successfully demonstrated. © 2020 by the authors. Licensee MDPI, Basel, Switzerland.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MECHANICAL ENGINEERING > 1. Journal Articles

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.