Effect of Energy Input on the Characteristic of AISI H13 and D2 Tool Steels Deposited by a Directed Energy Deposition Process
- Authors
- Park, Jun Seok; Park, Joo Hyun; Lee, Min-Gyu; Sung, Ji Hyun; Cha, Kyoung Je; Kim, Da Hye
- Issue Date
- May-2016
- Publisher
- ASM International
- Keywords
- DIRECT METAL-DEPOSITION; 316L STAINLESS-STEEL; LASER; MICROSTRUCTURE; DIES; Energy Input; Additive Manufacturing; Traverse Speed; Equilibrium Partial Pressure; Increase Energy Input
- Citation
- Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, v.47A, no.5, pp.2529 - 2535
- Indexed
- SCIE
SCOPUS
- Journal Title
- Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science
- Volume
- 47A
- Number
- 5
- Start Page
- 2529
- End Page
- 2535
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/13704
- DOI
- 10.1007/s11661-016-3427-5
- ISSN
- 1073-5623
- Abstract
- Among the many additive manufacturing technologies, the directed energy deposition (DED) process has attracted significant attention because of the application of metal products. Metal deposited by the DED process has different properties than wrought metal because of the rapid solidification rate, the high thermal gradient between the deposited metal and substrate, etc. Additionally, many operating parameters, such as laser power, beam diameter, traverse speed, and powder mass flow rate, must be considered since the characteristics of the deposited metal are affected by the operating parameters. In the present study, the effect of energy input on the characteristics of H13 and D2 steels deposited by a direct metal tooling process based on the DED process was investigated. In particular, we report that the hardness of the deposited H13 and D2 steels decreased with increasing energy input, which we discuss by considering microstructural observations and thermodynamics. (C) The Minerals, Metals & Materials Society and ASM International 2016
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.