Influence of electrode groove geometry on the passive control of the depletion layer in microfluidic fuel cells
- Authors
- Lee, Seung-Wu; Ahn, Yoomin
- Issue Date
- Dec-2015
- Publisher
- Institute of Physics Publishing
- Keywords
- laminar flow-based fuel cell; membraneless micro fuel cell; grooved electrode surface; concentration boundary layer; chaotic mixing
- Citation
- Journal of Micromechanics and Microengineering, v.25, no.12
- Indexed
- SCIE
SCOPUS
- Journal Title
- Journal of Micromechanics and Microengineering
- Volume
- 25
- Number
- 12
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/16489
- DOI
- 10.1088/0960-1317/25/12/127001
- ISSN
- 0960-1317
- Abstract
- Mitigation of the concentration boundary layer is an essential requirement to improve the power density of microfluidic fuel cells. In this study, the formation of a groove shape in the surface of the electrodes, located in parallel on the bottom of the channel, is proposed for the passive control of the depletion layer. The flow field inside the channel is numerically simulated and cell performance is experimentally measured for the various groove formation patterns (converging, parallel, or diverging) and tilt angles (30, 45, or 60 degrees). Experimentally measured cell performance also shows superior results at the best conditions as determined by numerical modeling, where the interdiffusion zone at the fuel-oxidant interface is not significantly expanded and the flow in the direction normal to the electrode surface is large. Our results show that the depletion region is well-controlled when the groove angle is large and when the groove pattern is not parallel, due to the increase in chaotic mixing. At these conditions, with formic acid as the fuel and a platinum electrode, the maximum current density and peak power density are increased by 38.42% and 38.09%, respectively, compared to the values for flat electrodes. Even better cell performance is expected if the optimum design of the groove shape is determined using flow analysis.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MECHANICAL ENGINEERING > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.