EXPERIMENTAL INVESTIGATION OF B20 COMBUSTION AND EMISSIONS UNDER VARIOUS INTAKE CONDITIONS FOR LOW-TEMPERATURE COMBUSTION
- Authors
- J. KIM; J. JANG; 이기형; Y. LEE; S. LEE; S. OH
- Issue Date
- Mar-2014
- Publisher
- 한국자동차공학회
- Keywords
- Diesel; Biodiesel; Low-temperature combustion; Intake pressure; EGR (Exhaust Gas Recirculation)
- Citation
- International Journal of Automotive Technology, v.15, no.2, pp 183 - 189
- Pages
- 7
- Indexed
- SCIE
SCOPUS
KCI
- Journal Title
- International Journal of Automotive Technology
- Volume
- 15
- Number
- 2
- Start Page
- 183
- End Page
- 189
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/25068
- DOI
- 10.1007/s12239-014-0020-z
- ISSN
- 1229-9138
1976-3832
- Abstract
- Recently, biodiesel has emerged as an alternative fuel for achieving low-temperature combustion (LTC).
Several articles in the literature have showed that oxygenated biofuels, including biodiesel, can improve combustion stabilityunder high exhaust gas recirculation (EGR) operation, which is considered to be necessary for the removal of nitric oxides(NOx). The objective of this study was to investigate the performance and emissions of 20% biodiesel blended diesel fuel(B20) at various intake pressures and oxygen concentration levels to characterize the fuel for LTC application. Theexperimental investigation of B20 was carried out using a single-cylinder engine (SCE) at 1400 rpm and 50% load condition.
A set of critical flow orifices with synthetic EGR was employed to simulate various intake pressures and EGR levels. Thebehavior of the B20 was first characterized under various intake conditions. The results showed that with high oxygen intake,B20 exhibited combustion and emission levels that were very similar to conventional diesel. However, B20 reducedcombustion deterioration while exhibiting lower carbon monoxide (CO) and hydrocarbon (HC) emissions than diesel underlow oxygen intake conditions.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MECHANICAL ENGINEERING > 1. Journal Articles

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.