Influence of anionic polyelectrolyte addition on ceria dispersion behavior for quartz chemical mechanical polishing
- Authors
- Kim, Hyuk-Min; Venkatesh, R. Prasanna; Kwon, Tae-Young; Park, Jin-Goo
- Issue Date
- Oct-2012
- Publisher
- Elsevier BV
- Keywords
- Ceria; Poly(acrylic acid-co maleic acid) sodium salt; Dispersion; Quartz; Chemical mechanical polishing
- Citation
- Colloids and Surfaces A: Physicochemical and Engineering Aspects, v.411, pp.122 - 128
- Indexed
- SCIE
SCOPUS
- Journal Title
- Colloids and Surfaces A: Physicochemical and Engineering Aspects
- Volume
- 411
- Start Page
- 122
- End Page
- 128
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/31784
- DOI
- 10.1016/j.colsurfa.2012.07.009
- ISSN
- 0927-7757
- Abstract
- In this study, the effect of anionic dispersant, poly(acrylic acid-co maleic acid) sodium salt on ceria (CeO2) slurry stability was investigated for quartz chemical mechanical polishing (CMP) applications. The properties of the ceria slurry, including pH, viscosity, and stability behavior as a function of dispersant concentrations (0.1, 1, 3 and 5 wt%), were characterized to identify optimized conditions for the polishing process. With the addition of dispersant, the pH of ceria slurry increased to an alkaline regime which is compatible for quartz CMP processing while the viscosity sharply increased at 5 wt%. The stability results show that the slurry is stable only at 3 wt%, whereas the particles become agglomerated and settle quickly at all other dispersant concentrations. Adsorption and electrokinetic behavior of the ceria slurry were measured to understand the ceria slurry behavior at various dispersant concentrations. At low concentrations, the dispersant does not protect the particles enough to overcome the van der Waals attraction forces, whereas, at higher concentrations, particle agglomeration occurs due to bridging flocculation. At the optimum concentration, the dispersant provides enough steric hindrance to overcome the attractive force. In addition, the presence of sodium ions in the dispersant also strongly influences the settling behavior of ceria particles. The polishing test showed that the desired removal rate and surface quality could be achieved with the optimized slurry. (C) 2012 Elsevier B.V. All rights reserved.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/31784)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.