산업용 직각형 감속기의 소음 저감에 대한 연구A Study on Noise Reduction for an Industrial Right-angled Reducer
- Other Titles
- A Study on Noise Reduction for an Industrial Right-angled Reducer
- Authors
- 서홍승; 정진태; 박성필
- Issue Date
- Jun-2011
- Publisher
- 한국소음진동공학회
- Keywords
- Reducer; Gear Mesh Frequency; Vibration; Noise Reduction; Structure Modification; 감속기; 기어물림주파수; 진동; 소음 저감; 구조 변경
- Citation
- 한국소음진동공학회논문집, v.21, no.6, pp.546 - 552
- Indexed
- KCI
- Journal Title
- 한국소음진동공학회논문집
- Volume
- 21
- Number
- 6
- Start Page
- 546
- End Page
- 552
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/38920
- DOI
- 10.5050/KSNVE.2011.21.6.546
- ISSN
- 1598-2785
- Abstract
- In this study, noise sources of a reducer which is combined a spiral bevel gear and a planocentric gear are identified by experimental method and the noise was reduced by the structure modification of the reducer. In order to identify the noise sources, noise and vibration signals were measured by microphone and accelerometer and these signals were analyzed with waterfall plot. In addition, the frequency response functions were obtained to prove the noise and vibration sources. It was found that the resonance was generated by the gear mesh frequencies and natural frequency of the reducer.
The noise of the reducer could be reduced by structure modification.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MECHANICAL ENGINEERING > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.