Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
Cu 입자분산 Al2O3 나노복합재료의 미세조직과 기계적 특성에 미치는 소결온도의 영향Effect of Sintering Temperature on Microstructure and MechanicalProperties of Cu Particles Dispersed Al2O3 Nanocomposites
- Other Titles
- Effect of Sintering Temperature on Microstructure and MechanicalProperties of Cu Particles Dispersed Al2O3 Nanocomposites
- Issue Date
- Oct-2006
- Publisher
- 한국분말야금학회
- Keywords
- Al2O3/Cu nanocomposites; Sintering temperature; Microstructure; Mechanical properties; Al2O3/Cu nanocomposites; Sintering temperature; Microstructure; Mechanical properties
- Citation
- 한국분말야금학회지, v.13, no.5, pp 366 - 370
- Pages
- 5
- Indexed
- KCI
- Journal Title
- 한국분말야금학회지
- Volume
- 13
- Number
- 5
- Start Page
- 366
- End Page
- 370
- ISSN
- 1225-7591
2287-8173
- Abstract
- The microstructure and mechanical properties of hot-pressed Al2O3/Cu composites with a different sintering temperature have been studied. The size of matrix grain and Cu dispersion in composites increased with increase in sintering temperature. Fracture toughness of the composite sintered at high temperature exhibited an enhanced value. The toughness increase was explained by the thermal residual stress, crack bridging and crack branching by the formation of microcrack. The nanocomposite, hot-pressed at 1450℃, showed the maximum fracture strength of 707 MPa. The strengthening was mainly attributed to the refinement of matrix grains and the increased toughness.
- Files in This Item
- Go to Link
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
Related Researcher
- CHOA, YONG HO
- ERICA 첨단융합대학 (ERICA 신소재·반도체공학전공)