Design optimization of selective lithium leaching of cathodic active materials from spent lithium-ion batteries based on the Taguchi method

Abstract

The use of lithium-ion batteries (LIBs) has increased in recent years. Thus, efficient recycling is important. In this study, the Taguchi method was used to find the optimal selective lithium leaching parameters for spent LIB recycling. Orthogonal array, signal-to-noise ratio, and analysis of variance were employed to investigate the optimization of selective lithium leaching. The experimental parameters were heat treatment and leaching conditions. The lithium leaching ratio was analyzed by inductively coupled plasma (ICP). The reaction temperature was analyzed by thermogravimetry differential scanning calorimetry (TG-DSC) using lithium cobalt oxide (LCO) and carbon powder, and X-ray diffraction (XRD) was performed after heat treatment at different temperatures. From the XRD analysis, a Li2CO3 peak was observed at 700◦C. After heat treatment at 850◦C, a peak of Li2O was confirmed as Li2CO3 decomposed into Li2O and CO2 over 723◦C. The Li2O reacts with Co3O4 at a high temperature to form LCO. The phase of lithium in the LIB changes according to the conditional heat treatment, affecting the lithium leaching rates. As heat treatment conditions, N2 atmosphere combined with 700◦C heat treatment is suitable, and the solid–liquid ratio is important as a leaching factor for selective lithium leaching. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.