Evaluation of Workability on the Microstructure and Mechanical Property of Modified 9Cr-2W Steel for Fuel Cladding by Cold Drawing Process and Intermediate Heat Treatment Condition
- Authors
- Heo, Hyeong-Min; Kim, Jun-Hwhan; Kim, Sung-Ho; Kim, Jong-Ryoul
- Issue Date
- Mar-2018
- Publisher
- MDPI
- Keywords
- intermediate heat treatment; boron; fabrication process
- Citation
- METALS, v.8, no.3, pp.1 - 12
- Indexed
- SCIE
SCOPUS
- Journal Title
- METALS
- Volume
- 8
- Number
- 3
- Start Page
- 1
- End Page
- 12
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/6729
- DOI
- 10.3390/met8030193
- ISSN
- 2075-4701
- Abstract
- In this study, we evaluated the cold drawing workability of two kinds of modified 9Cr-2W steel containing different contents of boron and nitrogen depending on the temperature and time of normalizing and tempering treatments. Using ring compression tests at room temperature, the effect of intermediate heat treatment condition on workability was investigated. It was found that the prior austenite grain size can be changed by the austenite transformation and that the grain size increases with increasing temperature during normalizing heat treatment. Alloy B and Alloy N showed different patterns after normalizing heat treatment. Alloy N had higher stress than Alloy B, and the reduction in alloy N increased while the reduction in alloy B decreased. Alloy B showed a larger number of initially formed cracks and a larger average crack length than Alloy N. Crack length and number increased proportionally in Alloy B as the stress increased. Alloy B had lower crack resistance than Alloy N due to boron segregation.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.