선택적 금속 전착에 대한 전해질 온도 및 전류밀도 영향분석The Characteristics of Electrolyte Temperature and Current Density on Selective Jet Electrodeposition
- Other Titles
- The Characteristics of Electrolyte Temperature and Current Density on Selective Jet Electrodeposition
- Authors
- 박찬규; 김성빈; 김영국; 유봉영
- Issue Date
- 2018
- Publisher
- 한국표면공학회
- Keywords
- Electrodeposition; Metal 3D Printer; Electrolytic temperature; Current density
- Citation
- 한국표면공학회지, v.51, no.6, pp.400 - 404
- Indexed
- KCI
- Journal Title
- 한국표면공학회지
- Volume
- 51
- Number
- 6
- Start Page
- 400
- End Page
- 404
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/6969
- DOI
- 10.5695/JKISE.2018.51.6.400
- ISSN
- 1225-8024
- Abstract
- A metal 3D printer has been developed on its own to electrodeposit the localized area. Nozzles were used to selectively laminate the electrolytic plating method. To analyze the factors affecting the deposition, the stack height, thickness and surface roughness were experimentally analyzed according to the current density and the temperature of the electrolyte. Electrolytic temperature and current are electrodeposited when the deposition conditions are dominant over the etching conditions, but the thickness is kept constant. On the contrary, when the etching conditions are dominant, the electrodeposited shape is rather the etched. As a result, the uniformity of surface quality and electrodeposition rate could be improved by conducting experiments under constant conditions of electrolyte temperature and current density.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.