Detailed Information

Cited 0 time in webofscience Cited 0 time in scopus
Metadata Downloads

Distribution Behavior of Aluminum and Titanium Between Nickel-Based Alloys and Molten Slags in the Electro Slag Remelting (ESR) Process

Authors
Yang, Jun GilPark, Joo Hyun
Issue Date
Aug-2017
Publisher
ASM International
Keywords
THERMODYNAMIC PROPERTIES; CAO-SIO2-MNO SLAG; EQUILIBRIUM; SYSTEM; OXIDE; CAPACITY; SILICON; DIAGRAM; & lt; XCAF2; TiO2; Slag Composition; Present Experimental Condition; Molten Slag; Drierite
Citation
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, v.48, no.4, pp.2147 - 2156
Indexed
SCIE
SCOPUS
Journal Title
Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science
Volume
48
Number
4
Start Page
2147
End Page
2156
URI
https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/9094
DOI
10.1007/s11663-017-0994-9
ISSN
1073-5615
Abstract
The equilibrium reaction between Ni alloys and CaO-Al2O3-CaF2-TiO2 system electroslag remelting (ESR) slags was investigated in the temperature range of 1773 K to 1873 K (1500 A degrees C to 1600 A degrees C) at p(O-2) = 10(-16) atm in order to obtain the optimized composition of the slags for producing Ni alloys with various Al and Ti ratios. In addition, the temperature dependence of the reaction equilibria between the ESR slags and Ni alloys was also evaluated. The stable ionic species of titanium in the ESR slag under the present experimental conditions was experimentally confirmed to be mainly Ti4+ (i.e., TiO2) by X-ray photoelectron spectroscopy analysis of the quenched samples. The activity-composition relationship of TiO2 and Al2O3 in the ESR slag was determined as a function of the Al/Ti ratio of the alloys and the CaF2 content of the slags in conjunction with the activity ratio of Al to Ti in the alloys calculated from the FactSage(TM) 7.0 software. The temperature dependence of the activity-composition relationship of TiO2 and Al2O3 in the slag showed good linear correlations, and the equilibrium content ratio of TiO2 to Al2O3 at a fixed activity ratio increased with increasing temperature, which was expected based on the standard enthalpy change of the reaction. Thus, higher amounts of TiO2 should be added at higher operation temperatures in the ESR process. A 120 kg scale pilot ESR test (2000 A and 16 V) was performed to produce a commercial grade Ni-based superalloy based on the activity-composition relationship of the slag components obtained in the present study. Consequently, the contents of Al and Ti in the solidified ESR ingot were nearly the same as that of the original electrode throughout the entire length (280 mm) after the ESR process. (C) The Minerals, Metals & Materials Society and ASM International 2017
Files in This Item
Go to Link
Appears in
Collections
COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING > 1. Journal Articles

qrcode

Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.

Related Researcher

Researcher Park, Joo Hyun photo

Park, Joo Hyun
ERICA 공학대학 (DEPARTMENT OF MATERIALS SCIENCE AND CHEMICAL ENGINEERING)
Read more

Altmetrics

Total Views & Downloads

BROWSE