Coupled Electromagnetic-Thermal Analysis for Predicting Traction Motor Characteristics according to Electric Vehicle Driving Cycle
- Authors
- Hwang, Sung-Woo; Ryu, Jun-Yeol; Chin, Jun-Woo; Park, Soo-Hwan; Kim, Dae-Kee; Lim, Myung Seop
- Issue Date
- May-2021
- Publisher
- Institute of Electrical and Electronics Engineers Inc.
- Keywords
- Coupled analysis; driving cycle; electric vehicle; Electromagnetics; lumped parameter thermal network; Permanent magnet motors; Synchronous motors; Table lookup; Temperature distribution; Thermal analysis; traction motor; Traction motors
- Citation
- IEEE Transactions on Vehicular Technology, v.70, no.5, pp.4262 - 4272
- Indexed
- SCIE
SCOPUS
- Journal Title
- IEEE Transactions on Vehicular Technology
- Volume
- 70
- Number
- 5
- Start Page
- 4262
- End Page
- 4272
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/1156
- DOI
- 10.1109/TVT.2021.3071943
- ISSN
- 0018-9545
- Abstract
- The accuracy of motor characteristics prediction according to driving cycle can be improved by taking temperature change of motor into account. From this point of view, this paper proposes a fast and accurate coupled analysis method. To calculate motor circuit parameters, electromagnetic finite element analysis (FEA) is used. The proposed method consists of two stages to exclude the time consuming FEA from repetitive process. In pre-process stage, the circuit parameters are stored as look-up tables (LUTs) considering motor temperature. Further, a technique that allows reducing the number of analyses is developed to consider a wide operating temperature range with less time consumption. In main process stage, the torque and voltage equations are solved using the circuit parameter LUTs. Among the solved motor characteristics, losses are applied to lumped parameter thermal network (LPTN) as heat sources to figure out thermal characteristics. Here, techniques including loss separation and thermal parameter tuning are introduced to improve both accuracy and speed of the LPTN. Since the computation of the characteristic equations and LPTN are fast, the iterative analysis at entire time steps of the driving cycle is facilitated. An example of the proposed method is presented using worldwide harmonized light vehicle test procedure (WLTP). Thereafter, the effectiveness of the method is discussed by comparison with conventional methods. Finally, the experimental verifications are conducted to validate the electromagnetic FEA and LPTN used in this study.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 미래자동차공학과 > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/1156)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.