Detailed Information
Cited 0 time in 
Cited 0 time in 
Cited 0 time in
Metadata Downloads
Influence of Pad Design on Assembly Reliability of Surface Mounted Devices
- Authors
- Park, Dong-Woon; Yu, Myeong-Hyeon; Kim, Do-Hyung; Jang, Dong-Min; Jang, Jin-Woo; Lee, Seung-Yeong; Kim, Hak-Sung
- Issue Date
- Sep-2023
- Publisher
- KOREAN SOC PRECISION ENG
- Keywords
- Passive component; Pad design; Surface Mount Technology (SMT); Assembly defect rate; CFD simulation
- Citation
- INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, v.10, no.5, pp.1235 - 1248
- Indexed
- SCIE
SCOPUS
KCI
- Volume
- 10
- Number
- 5
- Start Page
- 1235
- End Page
- 1248
- ISSN
- 2288-6206
- Abstract
- During the reflow process in surface mount technology (SMT), a passive component misplaced on a pad would be self-aligned or tombstoned due to a restoring force which is driven by surface tension of molten solder. In this study, the influence of pad design on assembly defect rate was experimentally and analytically investigated using computational fluid dynamics (CFD) simulation. The assembly defect rate of the SMT was experimentally derived from the design of experiments (DOE) considering the pad design and the misplacement of the passive component. The restoring force and moment acting on the chip resistor were calculated using CFD simulation considering the fluidic forces of the molten lead-free solder paste during the reflow process according to the amount of the misplacement and the pad design parameters.
- Files in This Item
- Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 기계공학부 > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
Related Researcher
- Kim, Hak Sung
- COLLEGE OF ENGINEERING (SCHOOL OF MECHANICAL ENGINEERING)