GDI 연료분사 시스템에서 분사압력이 분무발달과정과 미립화에 미치는 영향 분석Effect of injection pressure on spray development procedure and atomization in a Gasoline Direct Injection system
- Other Titles
- Effect of injection pressure on spray development procedure and atomization in a Gasoline Direct Injection system
- Authors
- 송진근; 김대식; 박성욱
- Issue Date
- Sep-2014
- Publisher
- 한국분무공학회
- Keywords
- Atomization; 미립화; Spray development; 분무발달; High pressure injection; 고압분사; Spray tip penetration length; 분무도달거리
- Citation
- 한국액체미립화학회 학술발표논문집, v.2014, no.0, pp.60 - 61
- Indexed
- OTHER
- Journal Title
- 한국액체미립화학회 학술발표논문집
- Volume
- 2014
- Number
- 0
- Start Page
- 60
- End Page
- 61
- URI
- https://scholarworks.bwise.kr/hanyang/handle/2021.sw.hanyang/25776
- Abstract
- This study represents the spray development procedure and atomization regimes for a wide range of injection pressure for the Gasoline Direct Injection (GDI) system. To investigate the effect of injection pressure on the spray characteristics, injection pressure was swiped from 5MPa to 30MPa. Imaging method with a high-speed camera was used to take the spray sequential images, and the atomization regimes were predicted with dimensional analysis. The increase of injection pressure promoted spray atomization, which was supported by sequential spray images and the breakup regimes. However, the spray characteristics did not show significant differences for the injection pressure conditions over 20MPa.
- Files in This Item
-
Go to Link
- Appears in
Collections - 서울 공과대학 > 서울 기계공학부 > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.