PCD 공구를 이용한 티타늄 합금의 미세 가공
DC Field | Value | Language |
---|---|---|
dc.contributor.author | 문인용 | - |
dc.contributor.author | 김보현 | - |
dc.date.available | 2018-05-10T04:02:03Z | - |
dc.date.created | 2018-04-17 | - |
dc.date.issued | 2013-03 | - |
dc.identifier.issn | 1225-9071 | - |
dc.identifier.uri | http://scholarworks.bwise.kr/ssu/handle/2018.sw.ssu/11993 | - |
dc.description.abstract | Micro cutting of titanium alloy by polycrystalline diamond (PCD) tools was studied. Micro electro discharge machining (MEDM) was used to fabricate customized micro shaping tools from PCD blank. The tool was used to machine micro grooves on Ti alloy and the effects of depth of cut and machining length on tool wear, burr and surface roughness were studied. The shaping tool has cutting edge of a few µm. The crater size of the tool surface was increased with increasing capacitance of EDM machining conditions, which was used to control the surface roughness of the machined micro grooves. | - |
dc.language | 한국어 | - |
dc.language.iso | ko | - |
dc.publisher | 한국정밀공학회 | - |
dc.relation.isPartOf | 한국정밀공학회지 | - |
dc.subject | Micro Machining (미세 가공) | - |
dc.subject | Polycrystalline Diamond (다결정 다이아몬드) | - |
dc.subject | Surface Roughness (표면 조도) | - |
dc.title | PCD 공구를 이용한 티타늄 합금의 미세 가공 | - |
dc.title.alternative | Micro Machining of Titanium Alloy Using Polycrystalline Diamond Tools | - |
dc.type | Article | - |
dc.identifier.doi | 10.7736/KSPE.2013.30.3.284 | - |
dc.type.rims | ART | - |
dc.identifier.bibliographicCitation | 한국정밀공학회지, v.30, no.3, pp.284 - 291 | - |
dc.identifier.kciid | ART001745072 | - |
dc.description.journalClass | 2 | - |
dc.citation.endPage | 291 | - |
dc.citation.number | 3 | - |
dc.citation.startPage | 284 | - |
dc.citation.title | 한국정밀공학회지 | - |
dc.citation.volume | 30 | - |
dc.contributor.affiliatedAuthor | 김보현 | - |
dc.identifier.url | https://www.kci.go.kr/kciportal/ci/sereArticleSearch/ciSereArtiView.kci?sereArticleSearchBean.artiId=ART001745072 | - |
dc.description.isOpenAccess | N | - |
dc.subject.keywordAuthor | Micro Machining (미세 가공) | - |
dc.subject.keywordAuthor | Polycrystalline Diamond (다결정 다이아몬드) | - |
dc.subject.keywordAuthor | Surface Roughness (표면 조도) | - |
dc.description.journalRegisteredClass | kci | - |
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.
Soongsil University Library 369 Sangdo-Ro, Dongjak-Gu, Seoul, Korea (06978)02-820-0733
COPYRIGHT ⓒ SOONGSIL UNIVERSITY, ALL RIGHTS RESERVED.
Certain data included herein are derived from the © Web of Science of Clarivate Analytics. All rights reserved.
You may not copy or re-distribute this material in whole or in part without the prior written consent of Clarivate Analytics.