Protrusion Jaw가 적용된 볼 당김시험을 이용한 솔더 접합부의 강도와 파괴메커니즘 분석에 관한 연구Evaluation of Pull Strengths and Fracture Modes of Solder Joints by Modified Ball Pull Testing with Protrusion Jaw
- Authors
- 김형일; 김종민; 신영의; 한성원; 최명기
- Issue Date
- 2005
- Publisher
- 대한용접접합학회
- Keywords
- Au-Zn IMC; Fracture mode; Optimal jaw pressure; Protrusion jaw; Pull strength
- Citation
- 대한용접접합학회지, v.23, no.4, pp 34 - 40
- Pages
- 7
- Journal Title
- 대한용접접합학회지
- Volume
- 23
- Number
- 4
- Start Page
- 34
- End Page
- 40
- URI
- https://scholarworks.bwise.kr/cau/handle/2019.sw.cau/29578
- ISSN
- 2466-2232
2466-2100
- Abstract
- There have been numerous approaches to examine the bonding strengths of solder joints. However, despite the technical and practical limitations, the precedent test methods such as the ball shear and ball pull tests are being used in industrial applications. In this study, the optimum jaw pressure with the modified protrusion jaw was introduced in order to obtain higher successful rate for ball pull testing. Furthermore, the pull strengths and fracture modes of Sn-8Zn-3Bi, Sn-4Ag-0.7Cu, and Sn-37Pb eutectic solder after isothermal aging tests (100℃, 150℃) were evaluated with the protrusion jaw. The pull strength-displacement hysteresis curves and fracture surfaces were carefully investigated to evaluate the correlation between the pull strengths and the fracture modes of each solder. In conclusion, it is verified that Au-Zn IMCs (Intermetallic Compounds) have a detrimental effect on the pull strengths and changed fracture modes of Sn-8Zn-3Bi solder. Meanwhile, the microstructure transformation influences the degradation of pull strengths of Sn-4Ag-0.7Cu and Sn-37Pb solders.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > School of Mechanical Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.