Mechanical Properties of Solderable Polymer Composites with Low- and High-Melting-Point Solder Mixed Filler
- Authors
- Ha, M.J.; Kim, S.; Cho, W.C.; Kim, J.-M.; Yim, B.-S.
- Issue Date
- Jan-2023
- Publisher
- Japan Institute of Metals (JIM)
- Keywords
- electrically conductive adhesive; high-melting-point solder; low-melting-point solder; mechanical property; polymeric composites
- Citation
- Materials Transactions, v.64, no.4, pp 939 - 942
- Pages
- 4
- Journal Title
- Materials Transactions
- Volume
- 64
- Number
- 4
- Start Page
- 939
- End Page
- 942
- URI
- https://scholarworks.bwise.kr/cau/handle/2019.sw.cau/73894
- DOI
- 10.2320/matertrans.MT-M2022200
- ISSN
- 1345-9678
1347-5320
- Abstract
- A solderable polymer composite (SPC) with a low-melting-point solder (LMPS)/high-melting-point solder (HMPS) mixed filler was formulated to solve the bonding property and reliability problems in an SPC system with an LMPS filler. In addition, the possibility of enhancing the mechanical bonding properties of SPC with LMPS/HMPS mixed fillers was investigated. Three types of SPCs (mixing ratios for LMPS and HMPS: 100:0, 50:50, and 0:100) were prepared, and two types of mechanical property investigations (i.e., ball shear and microhardness tests) were performed to measure the mechanical bonding properties of SPCs according to the LMPS/HMPS mixing ratios. The SPC with an LMPS/HMPS mixed filler exhibited enhanced mechanical bonding properties compared with the Sn-58Bi solder paste and SPC with LMPS or HMPS only due to the change in composition and subsequent microstructure transformation of the solder joint after adding HMPS. © 2023 Japan Institute of Metals (JIM). All rights reserved.
- Files in This Item
- There are no files associated with this item.
- Appears in
Collections - College of Engineering > School of Mechanical Engineering > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.