Design and Validation of Tunable Stiffness Actuator using Soft-Rigid Combined Layer Jamming Mechanism
- Authors
- Ham, Seoyeon; Kang, Brian Byunghyun; Abishek, Kevin; Lee, Hyunglae; Kim, Wansoo
- Issue Date
- May-2023
- Publisher
- IEEE
- Citation
- 2023 IEEE International Conference on Soft Robotics, RoboSoft 2023, pp 1 - 6
- Pages
- 6
- Indexed
- SCIE
SCOPUS
- Journal Title
- 2023 IEEE International Conference on Soft Robotics, RoboSoft 2023
- Start Page
- 1
- End Page
- 6
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/113833
- DOI
- 10.1109/RoboSoft55895.2023.10121975
- ISSN
- 2769-4526
- Abstract
- This paper presents a tunable stiffness actuator with a soft-rigid combined layer jamming mechanism. The tunable stiffness actuator is aimed to be integrated into an exosuit to prevent ankle sprain and avoid or mitigate the development of chronic ankle instability. The main purpose of the soft-rigid layer jamming mechanism is to produce large stiffness with a small volume and achieve a linear stiffness characteristic. To this end, the actuator is designed to include rigid retainer pieces within the soft silicone layers, and each soft-rigid layer is jammed to induce stiffness changes. To validate the stiffness characteristics of the proposed soft-rigid actuator, a series of experiments were performed and stiffness changes were investigated for varying jamming states from unjammed to fully jammed states. Increasing the number of jamming layer effectively increased the actuator stiffness, which was consistent with expected results from the analytical model. Soft-rigid actuator's stiffness at the fully jammed state was 212.1% and 123.1% higher than the unjammed state for one-side and both sides anchored conditions, respectively. Compared to the soft actuator without the rigid retainer, the soft-rigid actuator exhibited a more linear characteristic (Pearson correlation coefficient = 0.990 and 0.997 for one-side and both sides anchored conditions, respectively). Moreover, the soft-rigid actuator achieved significantly higher stiffness than the soft actuator in all jamming states (at least 41.3% increase in each jamming state). The results suggest a potential use of the tunable stiffness actuator to develop a soft ankle exosuit with highly variable but linear stiffness characteristics.
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > DEPARTMENT OF ROBOT ENGINEERING > 1. Journal Articles
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.