Improvement of Amorphous InGaZnO Thin-Film Transistor Reliability and Electrical Performance Using ALD SiO2 Interfacial Layer on PECVD SiO2 Gate Insulator
- Authors
- Lee, Taeho; Oh, Saeroonter.
- Issue Date
- Jan-2024
- Publisher
- Institute of Electrical and Electronics Engineers Inc.
- Keywords
- Amorphous indium gallium zinc oxide (a-IGZO); atomic layer deposition (ALD) silicon dioxide (SiO<inline-formula xmlns:ali=http://www.niso.org/schemas/ali/1.0/ xmlns:mml=http://www.w3.org/1998/Math/MathML xmlns:xlink=http://www.w3.org/1999/xlink xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance> <tex-math notation=LaTeX>$_{\text{2}}$</tex-math> </inline-formula>) interfacial layer; double-stacked gate insulator (GI); hydrogen diffusion barrier; plasma-enhanced chemical vapor deposition (PECVD)
- Citation
- IEEE Transactions on Electron Devices, v.71, no.3, pp 1926 - 1934
- Pages
- 9
- Indexed
- SCIE
SCOPUS
- Journal Title
- IEEE Transactions on Electron Devices
- Volume
- 71
- Number
- 3
- Start Page
- 1926
- End Page
- 1934
- URI
- https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/118195
- DOI
- 10.1109/TED.2024.3355025
- ISSN
- 0018-9383
1557-9646
- Abstract
- Insulator engineering is required to improve the reliability of amorphous indium gallium zinc oxide (a-IGZO) thin-film transistors (TFTs). Silicon dioxide (SiO<inline-formula> <tex-math notation=LaTeX>$_{\text{2}}$</tex-math> </inline-formula>), which is widely used as the gate insulator (GI), is mainly deposited using plasma-enhanced chemical vapor deposition (PECVD) owing to its high deposition rate and large-area deposition capability at a relatively low temperature. However, SiO<inline-formula> <tex-math notation=LaTeX>$_{\text{2}}$</tex-math> </inline-formula> deposited by PECVD may contain high hydrogen content, and hydrogen within the IGZO film acts as an electron donor or passivates oxygen-related defects. Excessive hydrogen diffusion from PECVD SiO<inline-formula> <tex-math notation=LaTeX>$_{\text{2}}$</tex-math> </inline-formula> to the IGZO film during GI deposition and postdeposition annealing often results in severe negative shift of the threshold voltage. In this article, we used PECVD SiO<inline-formula> <tex-math notation=LaTeX>$_{\text{2}}$</tex-math> </inline-formula> insulator with an interfacial SiO<inline-formula> <tex-math notation=LaTeX>$_{\text{2}}$</tex-math> </inline-formula> layer deposited by atomic layer deposition (ALD) to control the hydrogen diffusion flux while maintaining the defect passivation role of hydrogen and reducing electron trapping defects within the GI. Compared to a device with no interfacial layer, the IGZO device with the ALD interfacial layer improved field-effect mobility from 8.05 to 10.97 cm<inline-formula> <tex-math notation=LaTeX>$^{\text{2}}$</tex-math> </inline-formula>/V<inline-formula> <tex-math notation=LaTeX>$\cdot$</tex-math> </inline-formula>s and also improved positive and negative bias stress (NBS) reliability by 53.3% and 56.2%, respectively. IEEE
- Files in This Item
-
Go to Link
- Appears in
Collections - COLLEGE OF ENGINEERING SCIENCES > SCHOOL OF ELECTRICAL ENGINEERING > 1. Journal Articles
![qrcode](https://api.qrserver.com/v1/create-qr-code/?size=55x55&data=https://scholarworks.bwise.kr/erica/handle/2021.sw.erica/118195)
Items in ScholarWorks are protected by copyright, with all rights reserved, unless otherwise indicated.